Template:Networking tswos manual qos

Summary

Quality of Service (QoS) is used to set up priority to specific devices, services or applications within the network through the router, so that the maximum amount of available throughput and speed can be used.

Port priority

Field	Value	Description
Port	Physical device port	Port ID.
Priority	CoS-[0..7]; default: CoS-0	Port-based priority of the specified port.
Prioritization mode	CoS | DSCP | Equal; default: CoS	Utilizes either CoS, DSCP or both markings equally. CoS operates at Layer 2 of the OSI model and consists of eight different classification groups to which Ethernet frames can belong. DSCP serves a similar purpose as CoS, but it does so at the network layer -- Layer 3 -- of the OSI model and uses a 6-bit field, as opposed to only 3 bits.

DSCP priority

Differentiated Services Code Point (DSCP) is a means of classifying and managing network traffic and of providing quality of service (QoS) in modern Layer 3 IP networks. It uses the 6-bit Differentiated Services (DS) field in the IP header for the purpose of packet classification.

802.1p priority

802.1p is a quality of service (QoS)/class of service (CoS) method that operates at the MAC layer (Layer 2). Equipment that supports 802.1p can add and recognize a value that indicates the priority level of the Ethernet frame. 802.1p—Displays the 802.1p priority tag values to be assigned to an egress queue, where 0 is the lowest and 7 is the highest priority.

Field	Value	Description
Scheduling mode	SP | WRR | WFQ; default: WRR	Possible modes: Strict Priority (SP): This method imparts the highest service to high priority traffic. Here, the queuing mechanism forwards as many frames as possible in a higher priority frame before moving to the queue with the next priority level. Weighted Round Robin (WRR): In this method, frames or packets of all the queues in the scheduler are serviced in each cycle. Priority among the different queues is maintained by forwarding a specific number of frames in each queue per cycle in a rotational manner. Combination of WRR and SP (WFQ): This queuing method is configurable in nature and it combines both WRR and SP. In this method, strict priority is given to time-sensitive or real-time traffic like voice and video, while WRR is adopted for other traffics.
Scheduling weights	Integer [1..127]	Weight value assignment of specific port queue for WFQ/WRR
802.1P Priority	Integer [0..7]	Internal priority mapping to egress queue ID. By default TC (Traffic Class) queue values are mapped 1 to 1 with CoS values. The higher the CoS marking, the higher will be the packet priority.

Bandwidth control

QoS bandwidth management allows you to control traffic flows on a network so that traffic does not exceed network capacity (resulting in network congestion) and also allows you to allocate bandwidth for certain types of traffic and for applications and users.

---

Storm control

---

Field	Value	Description
	; default: 1

[[Category:{{{name}}} Network section]]