TRB246 Wireless (Status)

From Teltonika Networks Wiki
Revision as of 12:17, 23 January 2024 by Vainius.l (talk | contribs) (Vainius.l moved page Draft:TRB246 Wireless (Status) to TRB246 Wireless (Status) without leaving a redirect)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > TRB Gateways > TRB246 > TRB246 Manual > TRB246 WebUI > TRB246 Status section > TRB246 Wireless (Status)

The information in this page is updated in accordance with firmware version TRB2M_R_00.07.11.3.

Summary

The Wireless page contains graphs that display various wireless data changes in real time.

This chapter of the user manual provides an overview of the wireless page for TRB246 devices.

Interfaces

The Interfaces page displays information about all wireless interfaces and clients connected to device.

Wireless interfaces


The Wireless interfaces section contains widgets that display the status of wireless interfaces of the device. The figure below is an example of the widget:

Wireless clients


The Wireless clients section shows various information about all active wireless sessions.

Channel analysis

The Channel analysis section displays the status of all available wireless networks at this moment.

Channel Interference


The Channel Interference section shows interactive diagram of channels interference radio bands that displays real-time allocation of channels in the environment.

Scans


The Scans section shows visible wireless networks table. Table can be sort by SSID, signal strength, channel, width, encryption and MAC address. Example below:

Rating


The Rating tab provides quality rating for each channel of selected radio band. The less noise, traffic in channel, the better rate.