RUT140 LEDs

This page contains information the different types of LEDs and their behaviour on a RUT140 device.

Power LED

The power LED is located on the bottom left corner of the front panel, just under the power connector.

It indicates whether the device is powered on or not.

State	Description
LED turned on	Device is powered on.
LED turned off	Device is not powered on.

WAN type LEDs

The WAN type LEDs are located at the top-right of the front panel.

File:Networking rut140 manual leds wan leds.png

They indicate which type of Internet connection is currently active.

State	Description
SIM1 LED on	A mobile data connection on SIM1 is active.
SIM1 LED off	A mobile data connection on SIM1 is inactive.
SIM2 LED on	A mobile data connection on SIM2 is active.
SIM2 LED off	A mobile data connection on SIM2 is inactive.
ETH LED on	An Ethernet data connection (wired WAN) is active.
ETH LED off	An Ethernet data connection (wired WAN) is inactive.

Ethernet port LEDs

The Ethernet port LEDs are located on the device's front panel, under each respective Ethernet port.

State	Description
LED on	Operating as a 10/100 Mbps connection.
LED off	No link established.
LED blinking	Connection established and there is activity on this port (data being transferred).