Template:Networking rutos manual power control
Revision as of 09:38, 14 May 2024 by Lukas.Krasauskis (talk | contribs) (Created page with "{{Template: Networking_device_manual_fw_disclosure | series = {{{series}}} | name = {{{name}}} | fw_version ={{Template: Networking_device_manual_latest_fw | series = {{{se...")
The information in this page is updated in accordance with firmware version .
Summary
The Power Control page hosts information and settings concerning the device's power management. This chapter provides an overview of the Power Control window within the {{{name}}} device interface.
Power Control Status
| Name | State | Description |
|---|---|---|
| Low Battery | Active | Inactive | |
| Ignition | On | Off |
Power Socket Pinout
Power Off
The power-off functionality enables configuration to automatically shut down the device once the ignition is turned off.
| Field | Value | Description |
|---|---|---|
| Enable | off | on; default: off | Enable/Disable Power Off functionality. |
| Execution delay for Ignition | integer; default: 30 | Defines the number of minutes that must elapse before a power-off action is executed once the 'Ignition' pin is turned off. |
| Execution delay for Low Battery | integer; default: 0 | Defines the number of minutes that must elapse before a power-off action is executed once the 'Low Battery' signal becomes active. |