Product change notifications (PCN) is a way of informing customers of upcoming changes related to Teltonika Networks products. This includes outward appearance adjustments, hardware improvements, changes to package contents, etc. Changes related to a product's firmware are not included in PCNs (click here to see the firmware changelog).
This page stores information regarding changes to the TRB500 device. Below you will find a list of both upcoming and already implemented changes sorted by newest to oldest (top to bottom).
2024.06.21: USB VID:PID Changes
Starting in July 2024, with the release of RutOS 7.08 firmware, TRB500 routers will have their USB Vendor ID (VID) and Product ID (PID) updated.
PCN Number: PCN_TRB500_VID:PID_2024_06_21_EN
Change description
Change type
Software change
Detailed description
This change involves updating the device's identification and product details.
From:
VID - 0525
PID - A4A2
Product: RNDIS/Ethernet Gadget
Manufacturer: Linux 4.14.336 with dwc3-gadget
To:
VID -1D12
PID - 0003
Product: TRB500
Manufacturer: Teltonika Networks
Change reasons
The current identifier is a generic Linux VID/PID, and we are changing it to our proprietary "Teltonika" VID/PID.
Affected products information
Model
Affected order codes
Order code changes
TRB500
TRB500 *****
No changes
Upcoming change date
2024 July
Change impact
Risk assessment
If your use case involves the utilization of USB VID/PID, it is important to note that these identifiers will change after a RutOS 7.08 firmware update. Therefore, if you are using the VID/PID in a specific manner, adjustments will need to be made to accommodate this change. However, if you have not customized or hardcoded any processes related to the VID/PID, this change should not have any impact.
Suggested implementation plan
Information included in this PCN will help adapt to the upcoming changes. For more detailed information, please contact your sales representative.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
To download the pdf version of this notification, click here.
2024.04.25: Product packaging changes
Starting from Q2 2024 TRB500 product packaging will be changed.
Starting from Q3 2024 TRB500 corrugated cardboard insert will be replaced by honeycomb insert made from cardboard.
Old insert:
New insert:
The housing dimensions will not be changed.
Change reasons
This change will improve structural stability and enhance impact resistance.
Affected products information
Model
Affected order codes
Order code changes
TRB500
TRB500 ******
No changes
Upcoming change date
2024 Q2
Change impact
Risk assessment
The product handling and storage process may require review. Marketing materials, such as photos, might need replacement.
Suggested implementation plan
Information included in this PCN will help adapt to the upcoming changes. For more detailed information, please contact your sales representative.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
To download the pdf version of this notification, click here.
With the release of RutOS version 7.07, TRB500 device will experience changes related to the security improvements of the device.
PCN Number: PCN_RUTOS_CHANGE_2024_03_08_EN
Change description
Change type
Firmware change
Detailed description
Previously, during device resets, logs, RMS connection state data, and SIM PIN settings remained unchanged. However, starting with RutOS firmware version 7.07, all devices will uniformly reset logs, RMS connection state data, and SIM PIN settings to factory defaults when using the reset button. Other reset methods, including WebUI, SMS, and others, will remain unimpacted by this change.
Change reasons
Increasing security
Affected products information
Model
Affected order codes
Order code changes
TRB500
TRB500 ******
No changes
Upcoming change date
2024 Q2, with the release of RutOS 7.07
Change impact
Risk assessment
The loss of device logs upon utilizing the reset button may disrupt operational records and slow down subsequent troubleshooting efforts.
Failure to set up the SIM PIN post-reset via the reset button may result in SIM card lockout due to repeated incorrect PIN entries, causing service disruption and requiring either SIM replacement or PIN reset.
The device is still visible in RMS post-reset but cannot be accessed. Therefore, re-adding the device to RMS is necessary for continued access.
Suggested implementation plan
Information included in this PCN will help adapt to the upcoming changes. For more detailed information, please contact your sales representative.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
To download the pdf version of this notification, click here.
2023.08.02: Product packaging changes
Starting from 2023 Q3 TRB500 router product packaging will be changed.
Change description
Change type
Packaging
Detailed description
The packaging for the product will undergo several updates including an update to the side print of the box. Additionally, the box will now feature press with certificates that will be printed according to the region. Finally, there will also be changes made to the company information section including the address, telephone number, email and website link.
Current design:
Updated packaging design:
Packaging dimensions will not change.
Change reasons
Design improvement.
Affected products information
Model
Affected order codes
Order code changes
TRB500
TRB500 ***** and specific TRB500 client codes
No changes
Upcoming change date
2023 Q3
Change impact
Risk assessment
The product handling and storage process may require review. Marketing materials, such as photos, might need replacement.
Suggested implementation plan
Information included in this PCN will help adapt to the upcoming changes. Some specific client codes are effected by these changes. For more detailed information please contact your sales representative.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above
To download the pdf version of this notification, click here.
2023.02.13: MAC address range change
All Teltonika Networks devices manufactured starting from 2023, week 9 will have additional new MAC address range.
Change description
Change type
MAC address range
Detailed description
All Teltonika Networks devices manufactured starting from 2023, week 9 may have a MAC address from the new MAC address range 20:97:27:00:00:00 - 20:97:27:FF:FF:FF, as well as the current MAC address range 00:1E:42:00:00:00 - 00:1E:42:FF:FF:FF
Change reasons
Endpoint of the previous MAC address range.
Affected products information
Model
Affected order codes
Order code changes
All Teltonika Networks devices
All order codes
No changes
Upcoming change date
2023, week 9
Change impact
Risk assessment
Device install procedures or any automated solutions might need modifications.
Suggested implementation plan
For more detailed information please contact your sales representative.
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above.
To download the pdf version of this notification, click here.
