Template:Networking device manual powering options ground loops
From Teltonika Networks Wiki
Revision as of 09:33, 27 June 2024 by Vainius.l (talk | contribs) (Created page with "==Ground loops== Do not connect the power supply negative terminal of our device to the chassis or earth exclusively. This connection could cause ground loops. For example,...")
Ground loops
Do not connect the power supply negative terminal of our device to the chassis or earth exclusively.
This connection could cause ground loops. For example, if the antenna shield and power supply negative terminal are connected to the chassis or earth, it forms a ground loop, therefore unwanted current could flow through a device PCB ground and may cause damage.