TSW210 First Start
This Wiki page contains the online version of the Quick Start Guide (QSG) for the TSW210 Switch. Here you will find an overview of the various components found on the front and back sides of a TSW210 switch, basic hardware installation, device specifications and general safety information. It is highly recommended that you acquaint yourself with with the Quick Start Guide before using the device. If you own a TSW210 switch, you can also find a printed version of the Quick Start Guide in the device's package.
Front view
No. | Description | |
---|---|---|
1 | 2 pin power socket | |
2 | Power LED | |
3 | LAN LEDs | |
4 | Ethernet ports | |
5 | SFP port | |
6 | SFP LEDs | |
Back view
No. | Description | |
---|---|---|
1 | Grounding screw | |
Connectors
2 pin power socket
No. | Description | Wire color | |
---|---|---|---|
1 | Power | Red | |
2 | Ground | Black | |
Ethernet port
No. | Action | Describtion | |
---|---|---|---|
1 | Orange LED lit | 10/100 Mbps link established | |
2 | Orange LED blinking | Active link connection | |
3 | Green LED lit | 1000 Mbps link established | |
SFP port
No. | Action | Describtion | |
---|---|---|---|
1 | Down LED lit | Lower port link established | |
2 | Down LED blinking | Lower port active traffic | |
3 | Up LED lit | Upper port link established | |
4 | Up LED blinking | Upper port active traffic | |
Safety information
TSW210 switch must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.
Technical specifications | |
---|---|
Input voltage range | 7 - 57 V |
Max power consumption | 4 W |
Max Ethernet cable length | 100 m |
日本国内専用です
本製品を電気通信事業者(移動体通信事業者、固定通信事業者、インターネットプロバイダなど)の電気通信回線(または公衆無線LAN)に直接接続することはできません。電気通信事業者の公衆電気通信回線設備に接続する場合は、必ず日本の「電気通信事業法」で認められた機器(ルーター、ゲートウェイ、モデムなど)を介して接続してください。
This sign on the package means that is necessary to read the User's Manual before you start using the device
This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste
BSMI-RoHS table
To download a PDF version of the TSW210 BSMI RoHS table, click here.