Template:With RF Operating Conditions
Revision as of 17:37, 5 November 2024 by RytisB (talk | contribs) (Created page with "=== Operating conditions === ---- * Operating temperature: -40° to +75° Celsius * Humidity should be in the range of 10% to 90% (non-condensing). Only use the device in dry environments. * Out of direct sunlight * Away from the heat source, corrosive substances, salts, and flammable gases '''Attention''': operation outside the permissible range can considerably shorten the service life of the device. === Faulty and damaged products === ---- * Do not attempt to dis...")
Operating conditions
- Operating temperature: -40° to +75° Celsius
- Humidity should be in the range of 10% to 90% (non-condensing). Only use the device in dry environments.
- Out of direct sunlight
- Away from the heat source, corrosive substances, salts, and flammable gases
Attention: operation outside the permissible range can considerably shorten the service life of the device.
Faulty and damaged products
- Do not attempt to disassemble the device or its accessories.
- Only qualified personnel must service or repair the device or its accessories.
- If your device or its accessories have been submerged in water punctured or subjected to a severe fall, do not use until they have been checked at an authorized service center.
Electrical safety
- Only use approved accessories.
- Do not connect with incompatible products or accessories.
- It is recommended to ground devices with grounding terminals before connecting them to power. Failure to ground appropriately might result in a shock hazard. The cross-sectional area of the protective grounding conductor should be at least 1 mm2.
Product handling
- You alone are responsible for how you use your device and any consequences related to its use.
- Use of your device is subject to safety measures designed to protect users and their environment.
- Always treat your device and its accessories with care, keeping it clean and dust-free.
- Avoid exposing your device or accessories to open flames, lit tobacco, liquids, moisture, or high humidity.
- Do not drop, throw, or attempt to bend your device or its accessories.
- Refrain from using harsh chemicals, cleaning solvents, or aerosols on the device or accessories.
- Do not paint your device or its accessories.
- Do not disassemble your device or accessories (except for SIM insertion, if applicable), as it contains no user-serviceable parts. Only qualified personnel should open the equipment for safety reasons.
- Ensure the use of ESD personal protective equipment when servicing the device.
- Avoid using your device in poorly ventilated spaces to prevent excessive heat buildup.
- Prolonged use in enclosed spaces may lead to excessive heat, raising the ambient temperature and causing automatic shutdown or network disconnection for safety. Allow the device to cool in a ventilated area before turning it on again.
- Follow national laws and local regulations for the disposal of electronic products.
- Do not operate the device where ventilation is restricted.
- Do not use or install this product near water to avoid fire or shock hazards.
- Avoid exposing the equipment to rain or damp areas.
- Arrange power and Ethernet cables to avoid them being stepped on or having items placed on them.
- Ensure that the voltage and rated current of the power source match the device’s requirements. Do not connect the device to an inappropriate power source.
- During thunderstorms, do not operate the device or its cables.
- Power off the device where blasting is in progress, in explosive atmospheres, or near medical life support equipment.
- Keep your device and accessories out of reach of small children. Do not allow children to play with the device, as it could cause injury or accidental damage. The device contains small parts with sharp edges that may pose a choking hazard.
- As with any wireless device, this device operates on radio signals, which cannot guarantee connection in all conditions. Never rely solely on a wireless device for emergency communications or in situations where connectivity interruptions could result in injury, property damage, data loss, or other hazards.
- The device may become warm during regular use.