From Teltonika Networks Wiki
Main Page > EOL Products > RUT850 > RUT850 Manual > RUT850 WebUI > RUT850 Services section > RUT850 GPS
Summary
The Global Positioning System (GPS) is a space-based radionavigation system. This chapter is an overview of the GPS function in RUT850 routers.
GPS
The GPS window displays your current coordinates and position on the map.
File:Services gps.PNG
GPS Settings
File:Services gps configuration.PNG
| FIELD NAME
|
VALUE
|
DESCRIPTION
|
| Enable GPS service
|
yes | no; Default: no
|
Toggles GPS ON or OFF
|
| Enable GPS data to server
|
yes | no; Default: no
|
Enables automatic GPS data transferring to a remote server
|
| Remote host/IP address
|
host | ip; Default: 212.47.99.61
|
Server IP address or domain name to send the coordinates to
|
| Port
|
integer [0..65535]; Default: 17050
|
Server port used for data transfer
|
| Protocol
|
TCP | UDP; Default: TCP
|
Protocol to be used for data transfer to server
|
TAVL Settings
| FIELD NAME
|
VALUE
|
DESCRIPTION
|
| Send GSM signal
|
yes | no; Default: no
|
Includes GSM signal strength information in GPS data package to be sent to server
|
GPS Mode
File:Services gps gps mode.PNG
Data Sending Parameters
| FIELD NAME
|
VALUE
|
DESCRIPTION
|
| Min period
|
integer [1..999999]; Default: 5
|
Period (in seconds) for data collection
|
| Min distance
|
integer [1..999999]; Default: 200
|
Distance difference (in meters) between last registered and current coordinates to collect data (even if Min period has not passed yet)
|
| Min angle
|
integer [1..999999]; Default: 30
|
Minimal angle difference between last registered and current coordinates to collect data (even if Min period has not passed yet)
|
| Min saved records
|
integer [1..32]; Default: 20
|
Minimal amount of coordinates registered to send them to server immediately (even if Send period has not passed yet)
|
| Send period
|
integer [1..999999]; Default: 60
|
Period for sending collected data to server
|
The GPS configuration section allows to save several different configurations for GPS data collection. Active configuration is automaticaly selected when configured conditions are met.
GPS Configuration
| FIELD NAME
|
VALUE
|
DESCRIPTION
|
| WAN
|
Mobile | Wired | WiFi; Default: Mobile
|
Interface which needs to be used to activate this configuration
|
| Type
|
Home | Roaming | Both; Default: Home
|
Mobile connection state needed to activate this configuration
|
GPS Geofencing
Geofencing is a feature which can detect whenever a device enters or leaves customized area.
File:Services gps geofencing.PNG
| Field name
|
Value
|
Description
|
| Enable
|
yes | no; Default: no
|
Toggles GPS Geofencing ON or OFF
|
| Longitude (X)
|
real number [-180..180]; Default: 0.000000
|
Longitude of selected point
|
| Latitude (Y)
|
real number [-90..90]; Default: 0.000000
|
Latitude of selected point
|
| Radius
|
integer [1..999999]; Default: 200
|
Radius of selected area
|
| Generate event on
|
Exit | Enter | Enter/Exit; Default: Exit
|
Specifies whether event takes place on exiting or entering the specified area or both
|
| Get current coordinates
|
-
|
Gets current device coordinates from GPS
|
See also
RUT850 GPS protocols
