RUT955 USB Tools
Summary
This chapter is an overview of the USB Tools service in RUT955 routers.
The Network Shares section is used to manage Network-attached storage (NAS) such as USB drives, SD cards and hard drives. The router supports the following file system architectures:
- FAT32*
- NTFS**
* supports SD cards with a capacity of up to 32 GB
** NTFS support available from FW version RUT9XX_R_00.05.02 and newer
Mounted File Systems
The Mounted File Systems tab displays information on mounted USB drives and SD cards. To view an attached drive, connect it to the router and click the Refresh button:
| field name | description |
|---|---|
| File System | The name of the Linux file system. In Linux systems /dev is the directory of device files. |
| Mount Point | Directory available for mounting additional file system |
| Available | Total memory available in the mounted system |
| Used | The amount of free memory in the mounted system |
| Safely Remove Disk |
Samba
The Samba functionality allows network sharing for specified directories.
| field name | value | description |
|---|---|---|
| Enable | yes | no; Default: no | Toggles Samba ON or OFF |
| Hostname | string; Default: Router_Share | Name of the Samba server |
| Description | string; Default: Teltonika_Router_Share | Short server description |
| Workgroup | string; Default: WORKGROUP | Name of the server's work group |
In the Shared Directories section you can add directories that are to be shared and configure some usage parameters.
| field name | value | description |
|---|---|---|
| Name | string; Default: my_dir | Name of the shared directory |
| Path | file path; Default: /mnt/sda1 | Path to the directory that is to be shared |
| Allow guests | yes | no; Default: no | If enabled, all users and guests can view the shared directory |
| Allowed users | string; Default: " " | Specifies users that are to be allowed to share this directory |
| Read-only | yes | no; Default: no | Makes the directory Read-only |
Samba Users
This page is used to add new Samba users.
| field name | value | description |
|---|---|---|
| Username | string; Default: " " | Name of the new user |
| Password | string; Default: " " | Password of the new user |
Printer Server
The Printer Server function allows you to configure and use a printer that is connected to the RUT955 device.
You can enable or disable the support for your printer with this panel. In order to add another printer, type in a name and click the Add button. To configure a printer, click Edit next to the printer in question.
| field name | value | description |
|---|---|---|
| Enable | yes | no; Default: no | Toggles printer support ON or OFF |
| Device | Default: " " | Chooses the printer |
| Port | integer [9100..9109]; Default: 9100 | TCP listener port |
| Bidirectional mode | yes | no; Default: no | Toggles bidirectional mode ON or OFF |
Supported USB modems
RUT955 also supports the following USB modems:
- Huawei MS2131i-8