Template:Networking rut2xx first start hardware installation

From Teltonika Networks Wiki
Revision as of 14:12, 19 February 2019 by Dziugas (talk | contribs) (Created page with "==Hardware installation== <ol> <li>Remove the SIM card slot tray with the pin needle. Insert your SIM card and push the tray back into the router. Correct SIM card orient...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Hardware installation

  1. Remove the SIM card slot tray with the pin needle. Insert your SIM card and push the tray back into the router. Correct SIM card orientation can be seen in the figure below:
    [[File:{{{file_sim}}}|{{{size_sim}}}px]]
  2. Attach 3G and WiFi antennas
  3. Connect the power adapter to the power socket located on the front panel of the device. Then plug the other end of the power adapter into a wall socket.
  4. Connect to the device wirelessly (SSID: {{{name}}}_****) or use an Ethernet cable.
Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rut2xx_first_start_hardware_installation&oldid=28043"