Template:Networking rutxxx manual powering options
This chapter contains information on powering options supported by {{{name}}} routers.
Power socket
The router has a 4 pin power socket and can be powered by a 9-30 VDC power supply unit (PSU). Refer to the table below for the power socket's pinout information:
|
 |
||||||||||||||||||
Passive PoE
The device may also be powered by an Ethernet cable via the LAN1 port:
[[File:{{{file_lan1}}}|{{{size_lan1}}}px]]
- The device is NOT COMPLIANT with the IEEE 802.3af-2003 standard: powering the device from an IEEE 802.3af-2003 power supply will damage the device as it is not rated for input voltages of the PoE standard.
- The device is NOT COMPLIANT with the IEEE 802.3at standard: it cannot power other devices over Ethernet.
RJ45 pinout:
Template:Networking rutxxx manual powering options passive poe table
Simultaneous powering
The router can be powered from a power socket and over Ethernet simultaneously. The power socket has higher priority meaning that the device will draw power from the power socket as long as it is available.
When the device is switching from one power source to another it loses power for a fraction of a second and may reboot. The device will function correctly after the reboot.
[[Category:{{{name}}} Manual]]