Monitoring via MQTT

Main Page > General Information > Configuration Examples > Router control and monitoring > Monitoring via MQTT

Summary

MQTT (MQ Telemetry Transport or Message Queue Telemetry Transport) is an ISO standard (ISO/IEC PRF 20922) publish-subscribe-based messaging protocol. It works on top of the TCP/IP protocol. It is designed for connections with remote locations where a "small code footprint" is required or the network bandwidth is limited. The publish-subscribe messaging pattern requires a message broker. This chapter is a guide on how to configure a basic MQTT setup on RUT routers.

How MQTT works

First lets look over how MQTT works on RUT routers. An MQTT connection takes place between two Clients and a Broker. A RUT router can be Broker, a Client or both. The MQTT Publisher (Client) present in RUT routers subscribes to two topics by default: router/get and get/<SERIAL>/command, where <SERIAL> is the router's serial number. When a third party client connects to the Broker, it sends the message id to the the topic router/get. The publisher then sends a response containing its serial number to the topic router/id. Now that the Client knows the router's serial number it can ask for values of various parameters by sending requests to the topic router/<SERIAL>/parameter_name. The MQTT Publisher can send responses containing values of these system parameters:


Parameter name	Parameter description
temperature	Temperature of the module in 0.1 degrees Celsius
operator	Current operator’s name
signal	Signal strength in dBm
network	Current network type (2G, 3G, 4G)
connection	Data connection status
wan	WAN IP address
uptime	System uptime in seconds
name	Router’s name
digital1	Value of digital input no. 1
digital2	Value of digital input no. 2
analog	Value of analog

After the client sends a message containing of these parameters, the Publisher will send a response message containing the value of the requested parameter to the topic router/<SERIAL>/parameter_name, where parameter_name is the name of the requested parameter.

It should also be noted that, according to the MQTT protocol, topic names are case-sensitive, for example topic router is not the same as topic RoUtEr.

Configuring the router

This section will provide an explanation on how to configure an MQTT Broker and MQTT Publisher on a RUT router.