RUT955 Input/Output

Periodic Control

---

The Periodic control section allows you to set up automatic output control rules that trigger output state changes at the specified period or interval.

field name	value	description
Enable	yes | no; Default: no	Toggles the rule ON or OFF
Output	Digital OC output | Digital Relay output; Default: Digital OC output	To which output the rule pertains
Action	On | Off; Default: On	Periodic action to be taken
Action timeout	yes | no; Default: no	Activates action timeout. Action timeout specifies whether an action should end after some time. For example, if the specified Action is to turn Digital OC output On and the action triggers, the Action timeout then turns Digital OC output back off after a specified amount of time in seconds specified in this field
Timeout (sec)	integer; Default: " "	Specifies how long the Action timeout is
Mode	Fixed | Interval; Default: Fixed	Fixed mode triggers the specified action on a specified day(s), hour and minute. For example, every Sunday at 8:30 AM Interval provides you with the possibility to set up an interval after which the same action takes place

Scheduler

---

The Scheduler lets you configure a schedule of when certain outputs are to be enabled or disabled.

Additional Information

• Input/Output hardware application examples:
  • Connecting relay to open collector output
  • Inverting relay output polarity
  • Using Inputs for security applications
  • Current measurement with analog input