SNMP

Summary

Simple Network Management Protocol (SNMP) is a popular protocol for network management. It is used for collecting information from, and configuring, network devices. This section is an overview of the SNMP function in RUT routers.

SNMP Configuration

Field name	Value	Description
Enable SNMP service	yes | no; Default: no	Toggles SNMP ON or OFF
Enable remote access	yes | no; Default: no	Opens a port in firewall so that the SNMP service may be reached remotely from WAN
Port	integer [0..65535]; Default: 161	SNMP service port
Community	Public | Pirvate | Custom; Default: Public	SNMP Community is an ID that allows access to a router's SNMP data
Location	string; Default: Location	Trap named sysLocation
Contact	string; Default: [email protected]	Trap named sysContact
Name	string; Default: [email protected]	Trap named sysName

SNMP Variables/OID

Name	OID	Description
ModemImei.0	.1.3.6.1.4.1.48690.1.1.0	Modem IMEI
ModemModel.0	.1.3.6.1.4.1.48690.1.2.0	Modem model
ModemManufacturer.0	.1.3.6.1.4.1.48690.1.3.0	Modem manufacturer
ModemRevision.0	.1.3.6.1.4.1.48690.1.4.0	Modem revision
ModemSerial.0	.1.3.6.1.4.1.48690.1.5.0	Modem serial number
Imsi.0	.1.3.6.1.4.1.48690.1.6.0	Modem IMSI
RouterName.0	.1.3.6.1.4.1.48690.1.7.0	Router's name
ProductCode.0	.1.3.6.1.4.1.48690.1.8.0	Router's Product code
BatchNumber.0	.1.3.6.1.4.1.48690.1.9.0	Router's batch number
HardwareRevision.0	.1.3.6.1.4.1.48690.1.10.0	Router's Hardware Revision number
SimState.0	.1.3.6.1.4.1.48690.2.1.0	SIM card status
PinState.0	.1.3.6.1.4.1.48690.2.2.0	PIN status
NetState.0	.1.3.6.1.4.1.48690.2.3.0	Mobile network registration status
Signal.0	.1.3.6.1.4.1.48690.2.4.0	Signal strength level
Operator.0	.1.3.6.1.4.1.48690.2.5.0	Operator currently in use
OperatorNumber.0	.1.3.6.1.4.1.48690.2.6.0	Operator number (MCC+MNC)
ConnectionState.0	.1.3.6.1.4.1.48690.2.7.0	Data session connection state
ConnectionType.0	.1.3.6.1.4.1.48690.2.8.0	Data session connection type
Temperature.0	.1.3.6.1.4.1.48690.2.9.0	Modem's temperature in 0.1 degrees Celsius
ReceivedToday.0	.1.3.6.1.4.1.48690.2.10.0	Tee current day's RX packet count
SentToday.0	.1.3.6.1.4.1.48690.2.11.0	The current day's TX packet count
ReceivedYesterday.0	.1.3.6.1.4.1.48690.2.12.0	Yesterday's RX packet count
SentYesterday.0	.1.3.6.1.4.1.48690.2.13.0	Yesterday's TX packet count
FirmwareVersion.0	.1.3.6.1.4.1.48690.2.14.0	Router's Firmware version
SimSlot.0	.1.3.6.1.4.1.48690.2.15.0	SIM slot currently in use
RouterUptime.0	.1.3.6.1.4.1.48690.2.16.0	Router up-time in seconds
ConnectionUptime.0	.1.3.6.1.4.1.48690.2.17.0	Mobile connection up-time in seconds
MobileIP.0	.1.3.6.1.4.1.48690.2.18.0	IP address of the mobile interface
Sent.0	.1.3.6.1.4.1.48690.2.19.0	The amount of data sent through the mobile interface
Received.0	.1.3.6.1.4.1.48690.2.20.0	The amount of data received through the mobile interface
CellID.0	.1.3.6.1.4.1.48690.2.21.0	ID of the current mobile operator's cell
SINR.0	.1.3.6.1.4.1.48690.2.22.0	SINR value in dB
RSRP.0	.1.3.6.1.4.1.48690.2.23.0	RSRP value in dBm
RSRQ.0	.1.3.6.1.4.1.48690.2.24.0	RSRQ value in dB
hotSpotId.0	.1.3.6.1.4.1.48690.3.4.1.0	Hotspot ID
hotSpotSsid.0	.1.3.6.1.4.1.48690.3.4.2.0	Hotspot SSID
hotSpotEnableState.0	.1.3.6.1.4.1.48690.3.4.3.0	Hotspot status (enabled or disabled)
hotSpotIP.0	.1.3.6.1.4.1.48690.3.4.4.0	Hotspot interface IP address
hotSpotDownloadBandWidth.0	.1.3.6.1.4.1.48690.3.4.5.0	Hotspot download bandwidth
hotSpotUploadBandWidth.0	.1.3.6.1.4.1.48690.3.4.6.0	Hotspot upload bandwidth
	1.3.6.1.4.1.99999.1.1.15	Signal strength trap
	1.3.6.1.4.1.99999.1.1.16	Connection type trap

Trap Settings

Field name	Value	Description
SNMP trap	yes | no; Default: no	Toggles SNMP trap ON or OFF
Host/IP	host | ip; Default: " "	Host to transfer SNMP traffic to
Port	integer [0..65535]; Default: 162	Port for trap's host
Community	Public | Pirvate; Default: Public	SNMP Community is an ID that allows access to a router's SNMP data