RUT955 SNMP
Main Page > EOL Products > RUT955 > RUT955 Manual > RUT955 WebUI > RUT955 Services section > RUT955 SNMP
Summary
Simple Network Management Protocol (SNMP) is a popular protocol for network management. It is used for collecting information from, and configuring, network devices. This section is an overview of the SNMP function in RUT routers.
MIB file downloads
| FIELD ROUTER | MIB FILE |
|---|---|
| RUT2XX | TLT-MIB_RUT2XX |
| RUT9XX | TLT-MIB_RUT9XX |
SNMP Configuration
| field name | value | description |
|---|---|---|
| MIB file | - | Downloads Teltonika's MIB file |
| Enable SNMP service | yes | no; Default: no | Toggles SNMP ON or OFF |
| Enable remote access | yes | no; Default: no | Opens a port in firewall so that the SNMP service may be reached remotely from WAN |
| Port | integer [0..65535]; Default: 161 | SNMP service port |
| Community | Public | Pirvate | Custom; Default: Public | SNMP Community is an ID that allows access to a router's SNMP data |
| Location | string; Default: Location | Trap named sysLocation |
| Contact | string; Default: [email protected] | Trap named sysContact |
| Name | string; Default: Name | Trap named sysName |
| SNMP version | v1/v2 | v1/v2/v3 | v3; Default: v1/v2 | Specifies which SNMP version is to be used |
| v1/v2/v3/v3: Username | string; Default: username | Set username to access SNMP |
| v1/v2/v3/v3: Authentication type | SHA | MD5; Default: SHA | Set authentication passphrase to generate key for SNMPv3 |
| v1/v2/v3/v3: Authentication passphrase | string; Default: passphrase | Set authentication passphrase to generate key for SNMPv3 |
| v1/v2/v3/v3: Encryption type | AES | DES; Default: AES | Set encryption type to use with SNMPv3 |
| v1/v2/v3/v3: Encryption passphrase | string; Default: passphrase | Set encryption passphrase to generate key for SNMPv3 |
Additional notes:
- Some configuration fields become available only when certain other parameters are selected. The names of the parameters are followed by a prefix that specifies the authentication type under which they become visible. Different color codes are used for different prefixes:
- Red for SNMP version: v1/v2/v3
- Purple for SNMP version: v3
- After changing any of the parameters, don't forget to click the Save button located at the bottom-right side of the page.
Trap Settings
| field name | value | description |
|---|---|---|
| SNMP trap | yes | no; Default: no | Toggles SNMP trap ON or OFF |
| Host/IP | host | ip; Default: " " | Host to transfer SNMP traffic to |
| Port | integer [0..65535]; Default: 162 | Port for trap's host |
| Community | Public | Pirvate; Default: Public | SNMP Community is an ID that allows access to a router's SNMP data |
SNMP Variables list
| NAME | OID | DESCRIPTION |
|---|---|---|
| ModemImei.0 | .1.3.6.1.4.1.48690.1.1.0 | Modem IMEI |
| ModemModel.0 | .1.3.6.1.4.1.48690.1.2.0 | Modem model |
| ModemManufacturer.0 | .1.3.6.1.4.1.48690.1.3.0 | Modem manufacturer |
| ModemRevision.0 | .1.3.6.1.4.1.48690.1.4.0 | Modem revision |
| ModemSerial.0 | .1.3.6.1.4.1.48690.1.5.0 | Modem serial number |
| Imsi.0 | .1.3.6.1.4.1.48690.1.6.0 | Modem IMSI |
| RouterName.0 | .1.3.6.1.4.1.48690.1.7.0 | Router's name |
| ProductCode.0 | .1.3.6.1.4.1.48690.1.8.0 | Router's Product code |
| BatchNumber.0 | .1.3.6.1.4.1.48690.1.9.0 | Router's batch number |
| HardwareRevision.0 | .1.3.6.1.4.1.48690.1.10.0 | Router's Hardware Revision number |
| SimState.0 | .1.3.6.1.4.1.48690.2.1.0 | SIM card status |
| PinState.0 | .1.3.6.1.4.1.48690.2.2.0 | PIN status |
| NetState.0 | .1.3.6.1.4.1.48690.2.3.0 | Mobile network registration status |
| Signal.0 | .1.3.6.1.4.1.48690.2.4.0 | Signal strength level |
| Operator.0 | .1.3.6.1.4.1.48690.2.5.0 | Operator currently in use |
| OperatorNumber.0 | .1.3.6.1.4.1.48690.2.6.0 | Operator number (MCC+MNC) |
| ConnectionState.0 | .1.3.6.1.4.1.48690.2.7.0 | Data session connection state |
| ConnectionType.0 | .1.3.6.1.4.1.48690.2.8.0 | Data session connection type |
| Temperature.0 | .1.3.6.1.4.1.48690.2.9.0 | Modem's temperature in 0.1 degrees Celsius |
| ReceivedToday.0 | .1.3.6.1.4.1.48690.2.10.0 | Tee current day's RX packet count |
| SentToday.0 | .1.3.6.1.4.1.48690.2.11.0 | The current day's TX packet count |
| ReceivedYesterday.0 | .1.3.6.1.4.1.48690.2.12.0 | Yesterday's RX packet count |
| SentYesterday.0 | .1.3.6.1.4.1.48690.2.13.0 | Yesterday's TX packet count |
| FirmwareVersion.0 | .1.3.6.1.4.1.48690.2.14.0 | Router's Firmware version |
| SimSlot.0 | .1.3.6.1.4.1.48690.2.15.0 | SIM slot currently in use |
| RouterUptime.0 | .1.3.6.1.4.1.48690.2.16.0 | Router up-time in seconds |
| ConnectionUptime.0 | .1.3.6.1.4.1.48690.2.17.0 | Mobile connection up-time in seconds |
| MobileIP.0 | .1.3.6.1.4.1.48690.2.18.0 | IP address of the mobile interface |
| Sent.0 | .1.3.6.1.4.1.48690.2.19.0 | The amount of data sent through the mobile interface |
| Received.0 | .1.3.6.1.4.1.48690.2.20.0 | The amount of data received through the mobile interface |
| CellID.0 | .1.3.6.1.4.1.48690.2.21.0 | ID of the current mobile operator's cell |
| SINR.0 | .1.3.6.1.4.1.48690.2.22.0 | SINR value in dB |
| RSRP.0 | .1.3.6.1.4.1.48690.2.23.0 | RSRP value in dBm |
| RSRQ.0 | .1.3.6.1.4.1.48690.2.24.0 | RSRQ value in dB |
| hotSpotId.0 | .1.3.6.1.4.1.48690.3.4.1.0 | Hotspot ID |
| hotSpotSsid.0 | .1.3.6.1.4.1.48690.3.4.2.0 | Hotspot SSID |
| hotSpotEnableState.0 | .1.3.6.1.4.1.48690.3.4.3.0 | Hotspot status (enabled or disabled) |
| hotSpotIP.0 | .1.3.6.1.4.1.48690.3.4.4.0 | Hotspot interface IP address |
| hotSpotDownloadBandWidth.0 | .1.3.6.1.4.1.48690.3.4.5.0 | Hotspot download bandwidth |
| hotSpotUploadBandWidth.0 | .1.3.6.1.4.1.48690.3.4.6.0 | Hotspot upload bandwidth |
| hotSpotUsers.0 | .1.3.6.1.4.1.48690.3.4.7.0 | Hotspot users list |
| hotSpotUsersPass.0 | .1.3.6.1.4.1.48690.3.4.8.0 | Hotspot users password list |
| hotSpotUsersActive.0 | .1.3.6.1.4.1.48690.3.4.9.0 | List of active Hotspot users |
| hotSpotUsersMac.0 | .1.3.6.1.4.1.48690.3.4.10.0 | Hotspot users MAC address list |
| hotSpotUsersIp.0 | .1.3.6.1.4.1.48690.3.4.11.0 | Hotspot users IP address list |
| hotSpotUsersStartTime.0 | .1.3.6.1.4.1.48690.3.4.12.0 | Hotspot users log in time list |
| hotSpotUsersUseTime.0 | .1.3.6.1.4.1.48690.3.4.13.0 | Hotspot users log in up-time list |
| hotSpotUsersDownload | .0.1.3.6.1.4.1.48690.3.4.14.0 | Hotspot users downloaded data count |
| hotSpotUsersUpload.0 | .1.3.6.1.4.1.48690.3.4.15.0 | Hotspot users uploaded data count |
| hotSpotEndTime.0 | .1.3.6.1.4.1.48690.3.4.16.0 | Hotspot |
| DigitalInput.0 | .1.3.6.1.4.1.48690.5.1.0 | Digital input state |
| DigitalIsolatedInput.0 | .1.3.6.1.4.1.48690.5.2.0 | Digital isolated input state |
| AnalogInput.0 | .1.3.6.1.4.1.48690.5.3.0 | Analog input state |
| DigitalOCOutput.0 | .1.3.6.1.4.1.48690.5.4.0 | Digital OC output state |
| DigitalRelayOutput.0 | .1.3.6.1.4.1.48690.5.5.0 | Digital Relay output state |
| AnalogInputCalc.0 | .1.3.6.1.4.1.48690.5.6.0 | Analog input value |
| Longtitude.0 | .1.3.6.1.4.1.48690.6.1.0 | GPS Longitude value |
| Latitude.0 | .1.3.6.1.4.1.48690.6.2.0 | GPS Latitude value |
| Accuracy.0 | .1.3.6.1.4.1.48690.6.3.0 | GPS coordinate accuracy |
| Datetime.0 | .1.3.6.1.4.1.48690.6.4.0 | GPS coordinate fix time |
| NumSatellites.0 | .1.3.6.1.4.1.48690.6.5.0 | Number of GPS satelites |