TRB140 Static Routes
Summary
Routing is the process of selecting a path for traffic in a network or between or across multiple networks. This chapter is an overview of the Routing section for TRB140 routers.
Static IPV4 Routes
| field name | value | description |
|---|---|---|
| Interface | lan | mobile | eth0 | The zone where the target network resides |
| Target* | ip; Default: 0.0.0.0 | The address of the destination network |
| IPv4-Netmask* | ip; Default: 0.0.0.0 | A Mask that is applied to the Target to determine to what actual IP addresses the routing rule applies |
| IPv4-Gateway | ip; Default: " " | Defines where the router should send all the traffic that applies to the rule |
| Metric | integer; Default: 0 | The Metric value is used as a sorting measure. If a packet about to be routed fits two rules, the one with the higher metric is applied |
| MTU | ||
| Route Type |