Serial Interface Control Commands

From Teltonika Networks Wiki
Revision as of 09:37, 22 November 2019 by MariusV (talk | contribs) (Created page with "__TOC__ === Serial Interface Control Commands === ---- The command controls the behavior of the UE‟s DCD (data carrier detection) line. [https://wiki.teltonika.lt/wiki...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > Serial Interface Control Commands

Serial Interface Control Commands

The command controls the behavior of the UE‟s DCD (data carrier detection) line.

3.1. AT&C Set DCD Function Mode - page 31

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Serial_Interface_Control_Commands&oldid=49369"