Serial Interface Control Commands

From Teltonika Networks Wiki
Revision as of 09:58, 22 November 2019 by MariusV (talk | contribs)

TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > Serial Interface Control Commands

Serial Interface Control Commands

The command controls the behavior of the UE‟s DCD (data carrier detection) line.

3.1. AT&C Set DCD Function Mode - page 31

The commanddetermines how the UE responds if DTR line is changed from lowto highlevelduring data mode.

3.2. AT&D Set DTR Function Mode - page 31

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Serial_Interface_Control_Commands&oldid=49378"