Template:Networking rut manual upnp

Summary

UPnP allows clients in the local network to automatically configure the router. This chapter is a summary of the UPnP function in RUT routers

The information in this page is updated in accordance with the [[Media:{{{fw_version}}}_WEBUI.bin|{{{fw_version}}}]] firmware version.

[[File:{{{file_redirects}}}|border|class=tlt-border]]

[[File:{{{file_settings1}}}|border|class=tlt-border]]

field name	value	description
Enabled	yes \| no; default: no	Turns the UPNP service on or off.
Enable secure mode	yes \| no; default: yes	Allow adding forwards only to requesting IP addresses
Enable additional logging	yes \| no; default: no	Puts extra debugging information into the system log
Downlink	Default: 1024	Value in KByte/s, informational only
Uplink	Default: 512	Value in KByte/s, informational only
Port	Default: 5000	Port to listen for requests

[[File:{{{file_settings2}}}|border|class=tlt-border]]

field name	value	description
Report system instead of daemon uptime	yes \| no; default: no	Use system uptime as UPnP uptime
Device UUID	Default:
Announced serial number	Default:
Announced model number	Default:
Notify interval	Default: 30
Clean rules threshold	Default: 20
Clean rules interval	Default: 600
Presentation URL	Default: http://192.168.1.1/
UPnP lease file	Default: /var/upnp.leases

ACLs specify which external ports may be redirected to which internal addresses and ports

[[File:{{{file_ACLs}}}|border|class=tlt-border]]

field name	value	description
Comment	Default: Allow high ports	Adds a comment to this rule
External ports	Default: 1024-65535	External port(s) which may be redirected. May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers
Internal Addresses	Default: 0.0.0.0/0	Internal address to be redirect to
Internal ports	Default: 1024-65535	Internal port(s) to be redirect to May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers
Action	Default: allow	Allows or forbids the UPnP service to open the specified port