Template:Networking trb2xx first start hardware installation

From Teltonika Networks Wiki
Revision as of 08:45, 30 March 2020 by Tomas.mikolaitis (talk | contribs) (Created page with "==Hardware installation== <ol> <li>Unscrew two back panel hex bolts and remove back panel.</li> <li>Insert your SIM card(s) in the SIM socket(s), which are located on...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Hardware installation

  1. Unscrew two back panel hex bolts and remove back panel.
  2. Insert your SIM card(s) in the SIM socket(s), which are located on the bottom side of PCB. Correct SIM card orientation can be seen in the figure below:
    [[File:{{{file_sim}}}|{{{size_sim}}}px]]
  3. Attach the panels and tighten the hex bolts.
  4. Attach Template:Name mobile antenna
  5. Connect the 16 pin terminal block with power adapter to the 16 pin connector located on the front panel of the device. Then plug the other end of the power adapter into a power outlet.
Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_trb2xx_first_start_hardware_installation&oldid=57550"