RUT955 Remote Monitoring & Administration

From Teltonika Networks Wiki
Revision as of 11:42, 12 June 2020 by Dziugas (talk | contribs) (Created page with "{{Template: Networking_device_manual_remote_management | name = RUT955 | series = RUT9xx | sms = 1 | json = 1 | vpn = 1 | snmp = 1 | modbus = 1 | mqtt = 1 | tr06...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > EOL Products > RUT955 > RUT955 Manual > RUT955 Remote Monitoring & Administration

RUT955 supports multiple monitoring and administration possibilities.

Remote control options

The RUT955 router supports the following remote control capabilities:

Remote control method Can get parameters Can set parameters
RMS
SSH
HTTP
SMS
JSON
VPN
SNMP
Modbus
MQTT
TR-069

RMS


The Remote Management System (RMS) is designed to conveniently monitor and manage all your Teltonika networking devices. The system allows to securely gather status information of your devices and to change their configuration even if the devices do not have public IP addresses.

RMS access can be configured from the SystemAdministrationRMS page.

Public IP


If you're using a SIM card that has a Public IP address (refer here for more information), you can reach the router via HTTP or SSH via its WAN IP address.

HTTP access


Remote HTTP access can be set up via the SystemAdministrationAccess Control page.

SSH access


Remote SSH access can be set up via the SystemAdministrationAccess Control page.

SMS


The router can be controlled via SMS messages using SMS utilities rules. SMS can be configured via the ServicesSMS UtilitiesSMS Rules page.

JSON-RPC


JSON-RPC access can be set up via the SystemAdministrationAccess Control page. Note: As of RUTOS firmware version 7.0 and higher, it is enabled by default.

VPN


Virtual Private Networks (VPNs) provide multiple flexible options on setting up remote access to the router and its LAN network. For more information on different types of VPNs supported by RUT955, visit the VPN manual page.

SNMP


Simple Network Management Protocol (SNMP) is a protocol for network management, used for collecting information from network devices. For more information on SNMP in RUT955, visit the SNMP manual page.

Modbus TCP


Modbus is a serial communications protocol used in communication with various types of industrial electronic devices. For more information on Modbus TCP in RUT955, visit the Modbus manual page.

MQTT


MQTT (MQ Telemetry Transport or Message Queue Telemetry Transport) is a publish-subscribe-based "lightweight" messaging protocol for use on top of the TCP/IP protocol. For more information on MQTT in RUT955, visit the MQTT manual page

TR-069


Technical Report 069 (TR-069) is a technical specification of the Broadband Forum that defines an application layer protocol for remote management of customer-premises equipment (CPE) connected to an Internet Protocol (IP) network. For more information on TR-069 in RUT955, visit the TR-069 manual page