Template:Networking rutos manual leds
This page contains information the different types of LEDs and their behaviour on a {{{name}}} router.
Power LED
The power LED is located on the bottom left corner of the front panel, just under the power connector.
[[File:{{{file_power}}}|400px]]
It indicates whether the router is powered on or not
| State | Description |
|---|---|
| LED turned on | Router is powered on |
| LED turned off | Router is not powered on |
Ethernet port LEDs
There are two LEDs located at the top of each Ethernet port.
[[File:{{{file_ethernet}}}|400px]]
They provide information on the current states of the Ethernet ports. Each port has two LEDs:
- Orange - 10/100 Mbps connection
- Green - 1000 Mbps connection
Below is an explanation on the behaviours of green and orange LEDs.
| State | Description |
|---|---|
| LED on | A data connection on the port is operational (cable plugged in, end device visible, no data is being transferred). |
| LED off | No data connection on the port is operational (no cable, bad cable or end device not visible for some other reason (such as damaged network card)). |
| LED blinking | Connection established and data is being transferred over this port. |
[[Category:{{{name}}} Manual]]