Template:Networking rut240 manual modbus modbus tcp set parameters table
From Teltonika Networks Wiki
Revision as of 07:26, 15 October 2020 by Dziugas (talk | contribs) (Created page with "<table class="nd-othertables"> <tr> <th width="350">value to set</th> <th width="180">register address</th> <th width="150">register value</th>...")
value to set | register address | register value | description |
---|---|---|---|
Hostname | 7 | Hostname | Changes hostname |
Device name | 71 | Device name | Changes device name |
Switch WiFi (ON/OFF*) | 203 | 1 | 0 | Turns WiFi ON or OFF |
Switch mobile data connection (ON/OFF*) | 204 | 1 | 0 | Turns mobile data connection ON or OFF |
Reboot | 206 | 1 | Reboots the router |
Change APN | 207 | APN code | Changes APN. The number of input registers may vary depending on the length of the APN, but the very first byte of the set APN command has to be specified as 1 |
Switch PIN4 state (ON/OFF*) | 325 | 1 | 0 | Turns PIN4 state ON or OFF |