RUT900 Port Mirroring (legacy WebUI)

From Teltonika Networks Wiki
Revision as of 13:42, 20 July 2021 by Dziugas (talk | contribs) (Dziugas moved page Draft:RUT900 Port Mirroring (legacy WebUI) to RUT900 Port Mirroring (legacy WebUI) without leaving a redirect)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > EOL Products > RUT900 > RUT900 Manual > RUT900 Legacy WebUI > RUT900 Services section (legacy) > RUT900 Port Mirroring (legacy WebUI)

The information in this page is updated in accordance with firmware version RUT9XX_R_00.06.09.5.

Note: this user manual page is for RUT900's old WebUI style available in earlier FW versions.

Summary

Port Mirroring (may also be referred to as SPAN (Switched Port Analyzer)) is a service that relays a copy of all network packets (incoming or outgoing) on one Ethernet port (Source Port) to another (Monitoring Port).

This page of the user manual provides an overview of the Port Mirroring service in RUT900 devices.

Port Mirroring

To configure Port Mirroring, first select a 'Monitoring Port' in the Switch section (1) (possible values correspond with the number of LAN Ethernet ports on your device). Once you do, the Source Ports section will become available for configuration, where you will be able to select the mirrored ports. You can choose to mirror received (incoming) packets (2), transferred (outgoing) packets (3) or both.

(Port numbering is identical to Ethernet port numbering on your device.)

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=RUT900_Port_Mirroring_(legacy_WebUI)&oldid=82777"