Template:Networking rutos manual modbus modbus tcp set parameters table
Revision as of 07:08, 24 August 2021 by Gytispieze (talk | contribs)
Set Parameters
The Modbus daemon can also set some device parameters.
| value to set | register address | register value | description |
|---|---|---|---|
| Reboot | 206 | 1 | Reboots the router |
| Switch PIN 3 state | 324 | 1|0 | Toggles PIN 3 ON or OFF, when output is selected |
| Switch PIN 4 state | 325 | 1|0 | Toggles PIN 4 ON or OFF, when output is selected |