RUT230 CLI (legacy WebUI)

From Teltonika Networks Wiki
Revision as of 09:08, 6 October 2021 by Gytispieze (talk | contribs) (Created page with "{{Template: Networking_rut_manual_cli_legacy <!------------------------DEVICE-----------------------> | name = RUT230 | series = RUT2XX }}")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > EOL Products > RUT230 > RUT230 Manual > RUT230 Legacy WebUI > RUT230 Services section (legacy) > RUT230 CLI (legacy WebUI)

The information in this page is updated in accordance with firmware version RUT2XX_R_00.01.14.7.

Notice: This device has entered it's EOL (End of Life) cycle. For more information, visit our EOL policy here. Temporarily, some content in this page might not match features found in firmware listed above.

Note: this user manual page is for RUT230's old WebUI style available in earlier FW versions. Click here for information based on the latest FW version.

Summary

The CLI or Command Line Interface functionality allows you to enter and execute Linux commands within the router.

This chapter of the user manual provides an overview of the CLI page for RUT230 devices. You can use "CTRL + ALT + Q" keyboard combination to open a CLI in a new tab while on any router's page.

CLI

CLI is a console interface similar to the Linux Terminal program. Use the following credentials to log in:

  • Username: root
  • Password: router's password

If the login was successful, you should be greeted with a window like this:

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=RUT230_CLI_(legacy_WebUI)&oldid=84634"