AT&T 3G Network shutdown information
As of February 22nd, 2022, AT&T, due to ongoing network improvement and 5G service expansion, will phase out its 3G network. This article will describe what steps are necessary to prepare for upcoming changes.
What actions do I need to take?
While AT&T will shut down its 3G network, Teltonika Networks devices will still work with other 3G service providers. There will be a required firmware upgrade to make sure that 4G/LTE Category 1, 3 and 4 devices in the U.S could still connect to 4G even after the scheduled sunset.
You must upgrade the affected devices (table below) to the latest firmware before February 22nd, 2022. Failing to execute the following action will leave your devices unable to use mobile data connection.
Affected products
| Product group | Product code | Modem | Modem FW version | New Teltonika Firmware download |
|---|---|---|---|---|
| RUT240 | RUT24001**** | Quectel EC25-A | EC25AFAR02A06M4G EC25AFAR05A04M4G EC25AFAR05A07M4G EC25EFAR02A06M4G EC25EFAR02A08M4G |
RUT2_R_00.07.01.2 |
| RUT24007**** | Quectel EG25-G | EC25AFAR02A06M4G EC25AFAR05A04M4G EC25AFAR05A07M4G EC25EFAR02A06M4G EC25EFAR02A08M4G | ||
| RUT2400A**** | Quectel EC25-AF | EC25AFFAR07A08M4G | ||
| RUT360 | RUT3601***** | Quectel EG06-A | EG06ALAR02A07M4G | RUT36X_R_00.07.01.2 |
| RUT950 | RUT950JG1*** | Quectel EC25-A | EC25AFAR02A06M4G EC25AFAR05A04M4G EC25AFAR05A07M4G EC25EFAR02A06M4G EC25EFAR02A08M4G |
RUT9XX_R_00.06.08.6 |
| RUT950 | RUT950V02*** | Quectel EG25-G | EC25AFAR02A06M4G EC25AFAR05A04M4G EC25AFAR05A07M4G EC25EFAR02A06M4G EC25EFAR02A08M4G |
RUT9_R_00.07.01.2 |
| RUT950J02*** | Quectel EC25-A | EC25AFAR02A06M4G EC25AFAR05A04M4G EC25AFAR05A07M4G EC25EFAR02A06M4G EC25EFAR02A08M4G | ||
| RUT950W02*** | Quectel EC25-AF | EC25AFFAR07A08M4G | ||
| RUT955 | RUT955J7V*** | Quectel EC25-A | EC25AFAR02A06M4G EC25AFAR05A04M4G EC25AFAR05A07M4G EC25EFAR02A06M4G EC25EFAR02A08M4G |
RUT9XX_R_00.06.08.6 |
| RUT955V7V*** | Quectel EG25-G | EC25AFAR02A06M4G EC25AFAR05A04M4G EC25AFAR05A07M4G EC25EFAR02A06M4G EC25EFAR02A08M4G | ||
| RUT955 | RUT955J03*** | Quectel EC25-A | EC25AFAR02A06M4G EC25AFAR05A04M4G EC25AFAR05A07M4G EC25EFAR02A06M4G EC25EFAR02A08M4G |
RUT9_R_00.07.01.2 |
| RUT955V03*** | Quectel EG25-G | EC25AFAR02A06M4G EC25AFAR05A04M4G EC25AFAR05A07M4G EC25EFAR02A06M4G EC25EFAR02A08M4G | ||
| RUT955W03*** | Quectel EC25-AF | EC25AFFAR07A08M4G | ||
| RUTX09 | RUTX091***** | Quectel EG06-A | EG06ALAR02A07M4G | RUTX_R_00.07.01.2 |
| RUTX11 | RUTX111***** | Quectel EG06-A | EG06ALAR02A07M4G | RUTX_R_00.07.01.2 |
| RUTX12 | RUTX121***** | Quectel EG06-A | EG06ALAR02A07M4G | RUTX_R_00.07.01.2 |
| RUTXR1 | RUTXR11***** | Quectel EG06-A | EG06ALAR02A07M4G | RUTX_R_00.07.01.2 |
Once Teltonika device's Firmware is updated
Following actions will be performed automatically:
- Fetching new LTE Modem firmware (20-30MB size) to Teltonika Networks device. Firmware is being fetched from Teltonika's cloud and requires Mobile Data connection to be successful.
- Subsequent automatic update of LTE Modem firmware on your Teltonika device.
WebUI banner will indicate if the LTE Modem upgrade is still in progress or is finished.
If the LTE Modem upgrade is complete, you will get following message:
Your device is now back to normal functionality!
What do I need to know about this firmware update?
- LTE Modem firmware flashing duration is around 15-30 minutes
- Do not turn off the device
- During LTE Modem firmware flash normal functionality of the Teltonika Networks device will be impaired:
- No Mobile Data connection, SMS, call functions;
- Possible WebUI issues;
- If update has failed, LTE Modem firmware download and reflash procedure will start again at next power cycle for RUTOS, and on network / modem restart for Legacy firmware devices.