AT&T 3G Network shutdown information

From Teltonika Networks Wiki

As of February 22nd, 2022, AT&T, due to ongoing network improvement and 5G service expansion, will phase out its 3G network. This article will describe what steps are necessary to prepare for upcoming changes.

What actions do I need to take?

While AT&T will shut down its 3G network, Teltonika Networks devices will still work with other 3G service providers. There will be a required firmware upgrade to make sure that 4G/LTE Category 1, 3 and 4 devices in the U.S could still connect to 4G even after the scheduled sunset.


You must upgrade the affected devices (table below) to the latest firmware before February 22nd, 2022. Failing to execute the following action will leave your devices unable to use mobile data connection.

Affected products

Product group Product code Modem Modem FW version New Teltonika Firmware download
RUT240 RUT24001**** Quectel EC25-A EC25AFAR02A06M4G
EC25AFAR05A04M4G
EC25AFAR05A07M4G
EC25EFAR02A06M4G
EC25EFAR02A08M4G
RUT2_R_00.07.01.2
RUT24007**** Quectel EG25-G EC25AFAR02A06M4G
EC25AFAR05A04M4G
EC25AFAR05A07M4G
EC25EFAR02A06M4G
EC25EFAR02A08M4G
RUT2400A**** Quectel EC25-AF EC25AFFAR07A08M4G
RUT360 RUT3601***** Quectel EG06-A EG06ALAR02A07M4G RUT36X_R_00.07.01.2
RUT950 RUT950JG1*** Quectel EC25-A EC25AFAR02A06M4G
EC25AFAR05A04M4G
EC25AFAR05A07M4G
EC25EFAR02A06M4G
EC25EFAR02A08M4G
RUT9XX_R_00.06.08.6
RUT950 RUT950V02*** Quectel EG25-G EC25AFAR02A06M4G
EC25AFAR05A04M4G
EC25AFAR05A07M4G
EC25EFAR02A06M4G
EC25EFAR02A08M4G
RUT9_R_00.07.01.2
RUT950J02*** Quectel EC25-A EC25AFAR02A06M4G
EC25AFAR05A04M4G
EC25AFAR05A07M4G
EC25EFAR02A06M4G
EC25EFAR02A08M4G
RUT950W02*** Quectel EC25-AF EC25AFFAR07A08M4G
RUT955 RUT955J7V*** Quectel EC25-A EC25AFAR02A06M4G
EC25AFAR05A04M4G
EC25AFAR05A07M4G
EC25EFAR02A06M4G
EC25EFAR02A08M4G
RUT9XX_R_00.06.08.6
RUT955V7V*** Quectel EG25-G EC25AFAR02A06M4G
EC25AFAR05A04M4G
EC25AFAR05A07M4G
EC25EFAR02A06M4G
EC25EFAR02A08M4G
RUT955 RUT955J03*** Quectel EC25-A EC25AFAR02A06M4G
EC25AFAR05A04M4G
EC25AFAR05A07M4G
EC25EFAR02A06M4G
EC25EFAR02A08M4G
RUT9_R_00.07.01.2
RUT955V03*** Quectel EG25-G EC25AFAR02A06M4G
EC25AFAR05A04M4G
EC25AFAR05A07M4G
EC25EFAR02A06M4G
EC25EFAR02A08M4G
RUT955W03*** Quectel EC25-AF EC25AFFAR07A08M4G
RUTX09 RUTX091***** Quectel EG06-A EG06ALAR02A07M4G RUTX_R_00.07.01.2
RUTX11 RUTX111***** Quectel EG06-A EG06ALAR02A07M4G RUTX_R_00.07.01.2
RUTX12 RUTX121***** Quectel EG06-A EG06ALAR02A07M4G RUTX_R_00.07.01.2
RUTXR1 RUTXR11***** Quectel EG06-A EG06ALAR02A07M4G RUTX_R_00.07.01.2

How to update the firmware of Teltonika Networks Device

Following actions must be taken manually:

  1. Download corresponding firmware for your device from the table above.
  2. In the WebUI, navigate to System > Firmware and upload the downloaded firmware.
  3. Once uploaded - initiate the upgrade/update process and give your device some time to finish it.

Once device's firmware is updated

Following actions will be performed automatically:

  1. Fetching new LTE Modem firmware (20-30MB size) to Teltonika Networks device. Firmware is being fetched from Teltonika's cloud and requires Mobile Data connection to be successful.
  2. Subsequent automatic update of LTE Modem firmware on your Teltonika device.

WebUI banner will indicate if the LTE Modem upgrade is still in progress or is finished.

Networking Modem upgrade in progress.png

If the LTE Modem upgrade is complete, you will get following message:


Networking Modem upgrade finished.png


Your device is now back to usual functionality!

What do I need to know about this firmware update?

  • LTE Modem firmware flashing duration is around 15-30 minutes
  • Do not turn off the device
  • During LTE Modem firmware flash normal functionality of the Teltonika Networks device will be impaired:
    • No Mobile Data connection, SMS, call functions;
    • Possible WebUI issues;
  • If update has failed, LTE Modem firmware download and reflash procedure will start again at next power cycle for RUTOS, and on network / modem restart for Legacy firmware devices.