Changes

'''BAG·Tower''' is a monitoring and prevention platform that is compatible with '''Teltonika-Netwokrs''' devices. Their main goal is to provide a complete solution to control your equipment, manage your asset fleet and its operations.

'''BAG·Tower''' is a monitoring and prevention platform that is compatible with '''Teltonika-Networks''' devices. Their main goal is to provide a complete solution to control your equipment, manage your asset fleet and its operations.

==Introduction==

==Introduction==

===Create an asset===

===Create an asset===

----Set up BAG·Tower asset for your Teltonika-Networks device.

----Set up '''BAG·Tower''' asset for your '''Teltonika-Networks''' device.

*Login to your BAG·Tower account.

*Login into your '''BAG·Tower''' account.

* In '''Asset Management -> Your assets -> Asset List''' press '''Add Asset''' button.

*In '''Asset Management -> Your assets -> Asset List''' press '''Add Asset''' button.

[[File:Networking rutos configuration example bag tower usecase empty asset list v2.jpg|border|class=tlt-border|1102x1102px]]

[[File:Networking rutos configuration example bag tower usecase empty asset list v2.jpg|border|class=tlt-border|1102x1102px]]

*In the popup window press '''Create an Asset Manually''' button.

*In the popup window press '''Create an Asset Manually''' button.

*Enter your assets '''Name''' and press the '''Save''' button.

*Enter your assets '''Name''' and press the '''Save''' button.

[[File:Networking rutos configuration example bag tower usecase create asset second step v2.jpg|border|class=tlt-border]]

[[File:Networking rutos configuration example bag tower usecase create asset second step v2.jpg|border|class=tlt-border]]

*After saving the asset should appear in the '''Asset List'''.

*After saving the new '''Asset''' should appear in the '''Asset List'''.

[[File:Networking rutos configuration example bag tower usecase asset list initialized asset v2.jpg|border|class=tlt-border|1102x1102px]]

[[File:Networking rutos configuration example bag tower usecase asset list initialized asset v2.jpg|border|class=tlt-border|1102x1102px]]

===Connect device to BAG·Tower ===

===Connect device to BAG·Tower===

----Connect '''Teltonika-Networks''' device to the created '''BAG·Tower''' asset.

----Connect '''Teltonika-Networks''' device to the created '''BAG·Tower''' asset.

*Go to the '''Details''' page of the created '''BAG·Tower''' asset in '''Asset Management -> Your assets -> Asset List'''.

*Go to the '''Details''' page of the created '''BAG·Tower''' asset in '''Asset Management -> Your assets -> Asset List'''.

*In the '''Asset Detail''' page copy the generated '''API Key'''.

* In the '''Asset Detail''' page copy the generated '''API Key'''.

[[File:Networking rutos configuration example bag tower usecase asset details v2.jpg|border|class=tlt-border|1102x1102px]]

[[File:Networking rutos configuration example bag tower usecase asset details v2.jpg|border|class=tlt-border|1102x1102px]]

*Log in to '''Teltonika-Networks''' device and navigate to '''System -> CLI'''. Login using these credentials: '''Username - root''', '''Password - Your set Admin password'''. Alternatively you can connect to your device through your terminal using ssh command: <pre>ssh root@<device_ip_address> </pre> and then when prompted enter your device Admin password.

*Log in to '''Teltonika-Networks''' device and navigate to '''System -> CLI'''. Login using these credentials: '''Username - root''', '''Password - Your device Admin password'''. If you're having trouble finding any page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode," which is located at the top-right corner of the WebUI. Alternatively you can connect to your device through your terminal using '''ssh (Secure shell)''' command: <pre>ssh root@<device_ip_address> </pre>When asked follow the directions and enter '''yes''' and '''Your device Admin Password'''.

[[File:Networking rutos configuration example bag tower usecase webui cli v1.jpg|border|class=tlt-border|800x800px]]

[[File:Networking rutos configuration example bag tower usecase webui cli v1.jpg|border|class=tlt-border|800x800px]]

*Run the following command with __API_KEY__ replaced by the previously copied assets API Key:

*Run the following command with __API_KEY__ option replaced by the previously copied assets API Key:

<pre>

<pre>

sh -c "$(wget -qO - <nowiki>https://scripts.bagtower.bag-era.fr/install_push_teltonika.sh</nowiki>)" <nowiki>''</nowiki> __API_KEY__  

sh -c "$(wget -qO - <nowiki>https://scripts.bagtower.bag-era.fr/install_push_teltonika.sh</nowiki>)" <nowiki>''</nowiki> __API_KEY__  

</pre>

</pre>

*After you execute that command you should get a similar response to this with device type and version variations:

*After you execute that command you should get a similar response:

<pre>

<pre>

install script version 1.4.4

install script version 1.4.4

</pre>

</pre>

* Now your device should start sending information to the BAG·Tower platform. You should see your assets status change to Anomaly detected in the BAG·Tower platform Asset Management -> Your assets -> Asset List.

*Now your device should start sending information to the '''BAG·Tower''' platform. You should see your assets status change to '''Anomaly detected''' in the platforms page '''Asset Management -> Your assets -> Asset List'''. This is because there is no decoder configured for that asset or group.

[[File:Networking rutos configuration example bag tower usecase asset list anomaly v3.jpg|border|class=tlt-border|1102x1102px]]

[[File:Networking rutos configuration example bag tower usecase asset list anomaly v3.jpg|border|class=tlt-border|1102x1102px]]

===Create a decoder===

===Create a decoder===

----Create a '''BAG·Tower''' decoder so that '''BAG·Tower''' platform can understand information from '''Teltonika-Netwokrs''' device.

----Create a '''BAG·Tower''' decoder so that '''BAG·Tower''' platform can understand information from '''Teltonika-Networks''' device.

*To understand the information that is being sent from the device '''BAG·Tower''' needs to have a decoder. To configure it go to '''BAG·Tower''' platform page and in '''Asset Management -> Your assets -> Asset List''' click on details of an asset with the '''Status''' showing as '''Anomaly detected'''.

* To understand the information that is being sent from the device, '''BAG·Tower''' needs to have a decoder configured. To configure it go to '''BAG·Tower''' platform page and in '''Asset Management -> Your assets -> Asset List''' click on '''Detail >''' button of an asset with the '''Status''' showing as '''Anomaly detected'''.

[[File:Networking rutos configuration example bag tower usecase asset list anomaly details v1.jpg|border|class=tlt-border|1102x1102px]]

[[File:Networking rutos configuration example bag tower usecase asset list anomaly details v1.jpg|border|class=tlt-border|1102x1102px]]

*In the '''Asset''' '''Detail'''s page click '''Create a Decoder''' button.

*In the '''Asset''' '''Detail'''s page click '''Create a Decoder''' button.

[[File:Networking rutos configuration example bag tower usecase asset details decoder v3.jpg|border|class=tlt-border]]

[[File:Networking rutos configuration example bag tower usecase asset details decoder v3.jpg|border|class=tlt-border]]

*Change the name of the '''Decoder'''. Download Teltonika decoder file and replace the '''Code''' section content with the content from Teltonika decoder. Select an Asset and a Frame. You can get the latest version of Teltonika decoder from this BAG·Tower page.

*Change the name of the '''Decoder'''. Download Teltonika decoder file and replace the '''Code''' section content with the content from Teltonika decoder. Select an Asset and a Frame. You can get the latest version of Teltonika decoder from the '''BAG·Tower''' page or through [https://scripts.bagtower.bag-era.fr/teltonika_decoder.py this link].

[[File:Networking rutos configuration example bag tower usecase decoder step 1 v2.jpg|border|class=tlt-border|1102x1102px]]

[[File:Networking rutos configuration example bag tower usecase decoder step 1 v2.jpg|border|class=tlt-border|1102x1102px]]

*Press '''Test Decoder''' and wait for the test to finish.

*Press '''Test Decoder''' and wait for the test to finish.

*In the opened dialog window choose the '''Asset''', '''Tag''' or '''Group''' to attach this decoder to and click the '''Save''' button.

*In the opened dialog window choose the '''Asset''', '''Tag''' or '''Group''' to attach this decoder to and click the '''Save''' button.

[[File:Networking rutos configuration example bag tower usecase decoder step 4 v2.jpg|border|class=tlt-border]]

[[File:Networking rutos configuration example bag tower usecase decoder step 4 v2.jpg|border|class=tlt-border]]

[[File:Networking rutos configuration example bag tower usecase asset details online v2.jpg|border|class=tlt-border|1102x1102px]]

If everything was done correctly now you should be all set and your device information should now periodically update in the '''Asset Details''' page. Your '''Teltonika-Networks''' device asset in '''BAG·Tower''' platform should now be shows as '''Online''' and its '''Detail''' page should now show graphs with information from that device.[[File:Networking rutos configuration example bag tower usecase asset list online asset v3.jpg|border|class=tlt-border|1102x1102px]][[File:Networking rutos configuration example bag tower usecase asset details online v2.jpg|border|class=tlt-border|1102x1102px]]

==References==

==References/See Also==

BAG·Tower official site: https://www.getbagtower.com/en/home

BAG·Tower official site: https://www.getbagtower.com/en/home

BAG·Tower guide to connecting Teltonika asset: https://bagtower.tawk.help/en-us/article/connecting-teltonika-asset

BAG·Tower guide to connecting Teltonika asset: https://bagtower.tawk.help/en-us/article/connecting-teltonika-asset