Jump to content

CAP700 Interfaces

From Teltonika Networks Wiki
Revision as of 12:08, 3 April 2026 by TomasV (talk | contribs) (Created page with " {{Device interfaces | eth = 2 x RJ45 ethernet ports | dsl = 1 x RJ11 port | sim = 1 x SIM slot | wifi = 2.4 GHz / 5 GHz radio | cell = 5G LTE Cat 19 | io = | uart = Located on the device PCB for manufacturing purposes | reset = Physical button | serial = | mbus = | usb = 1 x Virtual network interface via micro USB | powerlan = 1 x Power/WLAN Button | ledbutton = 1 x Physical Button to turn On/Off LED | mic...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Hardware Interfaces

Device-supported hardware interfaces

InterfaceDetails
Ethernet ports2 x RJ45 ethernet ports
Telephone port1 x RJ11 port
SIM Slot1 x SIM slot
Wireless Radio2.4 GHz / 5 GHz radio
Cellular Radio5G LTE Cat 19
UARTLocated on the device PCB for manufacturing purposes
Reset ButtonPhysical button
USB port1 x Virtual network interface via micro USB
LED button1 x Physical Button to turn On/Off LED

Logical Interfaces

InterfaceDetails
WANOutbound traffic only
LANInbound traffic only
WLANWireless LAN
GSMCellular interface

Management Interfaces

All of the device management interfaces that are enabled by default

InterfaceDetails
Terminal AccessSSH
WebUI AccessHTTPS
SMS UtilitiesDevice must have an active SIM card installed

Default Open Ports

Every open port on the device by default

ServiceDetails
SSHPort 22/tcp (LAN only)
DNSPort 53/tcp
HTTPPort 80/tcp (redirects to HTTPS only)
HTTPSPort 443/tcp
DHCPPort 67/udp
DHCPv6Port 546/547/udp (IPv6 only)

LEDs

Visual Diagnostic Interfaces for Real-Time Chassis Monitoring

ItemDetails
Power LEDPower status indicator
Mobile Network LEDs3G, 4G / 5G
Signal Strength LEDsIndicates mobile signal strength
Ethernet LEDActivity/status indicator
Wi-Fi radio LEDWi-Fi Activity indicator