Changes

[[File:Hikvision_url_login_v4.png]]

[[File:Hikvision_url_login_v4.png]]

If this is the first time that you are connecting to the camera, you will be required to create a user. Just follow the prompts and after you have successfully logged in go to <b>Configuration</b> section (top left corner of the page) and navigate to the <b>Network → Basic Settings → TCP/IP</b> page. You can change the IP address from here, by editing the value of the <b>IPv4 Address</b> field:

If this is the first time that you are connecting to the camera, you will be required to create a user. Just follow the prompts and after you have successfully logged in go to the <b>Configuration</b> page (top left corner of the page) and navigate to the <b>Network → Basic Settings → TCP/IP</b> section. You can change the IP address from here, by editing the value of the <b>IPv4 Address</b> field:

[[File:Hikvision_change_camera_ip_v1.png]]

[[File:Hikvision_change_camera_ip_v1.png]]

Configure different IP addresses for all cameras that you may be using and move on to the next step.

Configure different IP addresses for all cameras that you may be using and advance to the next step.

==Step 3: configure Port Forwarding==

==Step 3: configure Port Forwarding==