If this is the first time that you are connecting to the camera, you will be required to create a user. Just follow the prompts and after you have successfully logged in go to <b>Configuration</b> section (top left corner of the page) and navigate to the <b>Network → Basic Settings → TCP/IP</b> page. You can change the IP address from here, by editing the value of the <b>IPv4 Address</b> field:
+
If this is the first time that you are connecting to the camera, you will be required to create a user. Just follow the prompts and after you have successfully logged in go to the <b>Configuration</b> page (top left corner of the page) and navigate to the <b>Network → Basic Settings → TCP/IP</b> section. You can change the IP address from here, by editing the value of the <b>IPv4 Address</b> field:
[[File:Hikvision_change_camera_ip_v1.png]]
[[File:Hikvision_change_camera_ip_v1.png]]
−
Configure different IP addresses for all cameras that you may be using and move on to the next step.
+
Configure different IP addresses for all cameras that you may be using and advance to the next step.