154
edits
Changes
DMVPN with IPsec Phase 3 (view source)
Revision as of 10:24, 26 January 2023
, 10:24, 26 January 2023no edit summary
The following section contains information on how to configure DMVPN <b>HUB</b>. Firstly, we'll configure the DMVPN instance to make the connection possible. Then we'll set the <b>Border Gateway Protocol</b> (<b>BGP</b>) parameters as our dynamic routing solution.
The following section contains information on how to configure DMVPN <b>HUB</b>. Firstly, we'll configure the DMVPN instance to make the connection possible. Then we'll set the <b>Border Gateway Protocol</b> (<b>BGP</b>) parameters as our dynamic routing solution.
<b>Note</b>:
<b>Notes</b>:
- At the moment, BGP is the only stable dynamic routing solution that can work with DMVPN.
- At the moment, BGP is the only stable dynamic routing solution that can work with DMVPN.
- If you are using non RUTX device, BGP and DMVPN have to be installed manually from the '''Services → Package Manager''' tab before continuing.
- If you're having trouble finding any page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode," which is located at the top-right corner of the WebUI.
- If you're having trouble finding any page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode," which is located at the top-right corner of the WebUI.