Changes

[[File:Networking rutx manual webui basic advanced mode.gif|border|center|class=tlt-border|1004x1004px]]

[[File:Networking rutx manual webui basic advanced mode.gif|border|center|class=tlt-border|1004x1004px]]

'''Note''': It is a additional software that can be installed from the '''Services → [[RUT955_Package_Manager|Package Manager]]''' page.

BACnet is a communication protocol for building automation and control (BAC) networks that use the ASHRAE, ANSI, and ISO 16484-5 standards protocol.  

'''Note''': It is a additional software that can be installed from the '''Services → [[RUT955_Package_Manager|Package Manager]]''' page.

Master - Slave Token Passing (MSTP) is most commonly used to connect field devices to controllers / routers / control applications. The physical layer uses RS485 which allows up to 128 devices to be installed on a single network.

=== Configuration ===

=== BACnet ===

----

----

=== Server ===

=== Server ===

----

----

== BACnet/IP ==

== BACnet/IP configuration ==

BACnet is a communication protocol for building automation and control (BAC) networks that use the ASHRAE, ANSI, and ISO 16484-5 standards protocol.  

BACnet is a communication protocol for building automation and control (BAC) networks that use the ASHRAE, ANSI, and ISO 16484-5 standards protocol.  

'''Note''': It is a additional software that can be installed from the '''Services → [[RUT955_Package_Manager|Package Manager]]''' page.

This is the most commonly used type of BACnet, which is designed to work over Ethernet networks using the Internet Protocol (IP). It supports both IPv4 and IPv6 addressing.

=== Configuration ===

=== Firewall ===

=== Server ===

=== Server ===