Changes

==Introduction==

==Introduction==

This article contains instructions on how to do UCI-based configuration for setting up RelayD with IPv4+IPv6 support.

This article contains instructions on how to do UCI-based configuration for setting up RelayD with IPv4+IPv6 support.

==Tunnelbroker configuration==

 

Tunnelbroker is a website operated by Hurricane Electric, a leading provider of internet services and networking solutions. The website provides a service called Hurricane Electric IPv6 Tunnel Broker, which allows users to create an IPv6 tunnel between their network and Hurricane Electric's network. This allows users to connect their devices to the internet using the IPv6 protocol, even if their internet service provider (ISP) does not support IPv6.

===Tunnelbroker configuration===

[http://tunnelbroker.net Tunnelbroker.net] is a website operated by Hurricane Electric, a leading provider of internet services and networking solutions. The website provides a service called Hurricane Electric IPv6 Tunnel Broker, which allows users to create an IPv6 tunnel between their network and Hurricane Electric's network. This allows users to connect their devices to the internet using the IPv6 protocol, even if their internet service provider (ISP) does not support IPv6.

====Login====

====Login====

----

----

Go to [http://tunnelbroker.net tunnelbroker.net] and log into your account. If you don't have a registered account then you will need to create one - click '''register'''.

Go to [http://tunnelbroker.net tunnelbroker.net] and log into your account. If you don't have a registered account then you will need to create one - click '''register'''.

[[File:Tunnelbroker login.png|border|center|class=tlt-border|1004x1004px]]

[[File:Tunnelbroker login v2.png|border|center|class=tlt-border|1022 × 385px]]

====IPv6 to IPv4 tunnel creation====

====IPv6 to IPv4 tunnel creation====

----

----

 

Setup IPv6 over IPv4, also known as 6in4 IPv6 transition mechanism. To create a new tunnel:

To create a new tunnel:

# Click on '''create regular tunnel''',

# Click on '''create regular tunnel''',

# '''Enter''' your '''public IP''' (it will light up green, if the tunnel can be created with this IP),  

# '''Enter''' your '''public IP''' (it will light up green, if the tunnel can be created with this IP),  

# '''Select''' the desired '''tunnel server''',

# '''Select''' the desired '''tunnel server''',

[[File:Create IPv6 Tunnel.png|border|center|class=tlt-border|854x854px]]

 

[[File:Create IPv6 Tunnel v2.png|border|center|class=tlt-border|844 × 688px]]

After successful tunnel creation, you will be prompt to tunnel details window.

After successful tunnel creation, you will be prompt to tunnel details window.

[[File:IPv6 Tunnel created.png|border|center|class=tlt-border|454x454px]]

[[File:IPv6 Tunnel created v2.png|border|center|class=tlt-border|663 × 638px]]

To create a a tunnel instance on your RUT router:

To create a a tunnel instance on your RUT router, navigate to '''example configurations''', there, select '''OpenWRT Barrier Breaker'''.  

# '''Navigate''' to '''example configurations''',  

and paste the following '''commands''' '''into''' your '''router CLI'''.  

# Select '''OpenWRT Barrier Breaker'''.  

# '''Paste''' the following '''commands''' '''into''' your '''RUT1 CLI'''.  

Do not forget to '''replace''' '''YOUR_TUNNELBORKER_USERNAME''' and '''YOUR_TUNNELBROKER_PASSWORD''' with your '''TunnelBroker account username''' and '''password'''.

[[File:Tunnel interface v2.png|border|center|class=tlt-border|661 × 641px]]

[[File:Tunnel interface.png|border|center|class=tlt-border|554x554px]]

'''Note''': Do not forget to '''replace''' '''YOUR_TUNNELBORKER_USERNAME''' and '''YOUR_TUNNELBROKER_PASSWORD''' with your '''TunnelBroker account username''' and '''password'''.

[[File:Tunnel RUT interface created.png|border|center|class=tlt-border|524x524px]]

==RUT2 configuration==

 

[[File:Tunnel RUT interface created v2.png|border|center|class=tlt-border|507 × 169px]]

==Router configuration==

===Relayd and interface configuration using UCI===

===Relayd and interface configuration using UCI===

----

----

If you've taken all of the steps described above, the configuration is done. But as with any other configuration, it is always wise to test the set up in order to make sure that it works properly.

If you've taken all of the steps described above, the configuration is done. But as with any other configuration, it is always wise to test the set up in order to make sure that it works properly.

[[File:Sujungta.png|border|center|class=tlt-border|1055x1055px]]

 

 

 

[[File:IPV6 on PC.png|border|center|class=tlt-border|701 × 434px]]

 

 

More about [http://tunnelbroker.net TunnelBroker.net]