Changes

23 bytes added ,  11:31, 12 April 2023
no edit summary
Line 1: Line 1: −
<p style="color:red">The information in this page is updated in accordance with [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.04'''] firmware version.</p>
+
<p style="color:red">The information in this page is updated in accordance with [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.03'''] firmware version.</p>
    
==Introduction==
 
==Introduction==
 
This article contains instructions on how to do UCI-based configuration for setting up RelayD with IPv4+IPv6 support.
 
This article contains instructions on how to do UCI-based configuration for setting up RelayD with IPv4+IPv6 support.
 
==Tunnelbroker configuration==
 
==Tunnelbroker configuration==
[http://tunnelbroker.net Tunnelbroker.net] is a website operated by Hurricane Electric, a leading provider of internet services and networking solutions. The website provides a service called Hurricane Electric IPv6 Tunnel Broker, which allows users to create an IPv6 tunnel between their network and Hurricane Electric's network. This allows users to connect their devices to the internet using the IPv6 protocol, even if their internet service provider (ISP) does not support IPv6.
+
Tunnelbroker is a website operated by Hurricane Electric, a leading provider of internet services and networking solutions. The website provides a service called Hurricane Electric IPv6 Tunnel Broker, which allows users to create an IPv6 tunnel between their network and Hurricane Electric's network. This allows users to connect their devices to the internet using the IPv6 protocol, even if their internet service provider (ISP) does not support IPv6.
 
====Login====
 
====Login====
 
----
 
----
Line 192: Line 192:  
If you've taken all of the steps described above, the configuration is done. But as with any other configuration, it is always wise to test the set up in order to make sure that it works properly.
 
If you've taken all of the steps described above, the configuration is done. But as with any other configuration, it is always wise to test the set up in order to make sure that it works properly.
   −
* Bulleted list item
+
* Check what IP address are you getting on [https://whatismyipaddress.com What is my IP address] website.
The first thing that could be checked is what IP address are you getting. You can do that [https://whatismyipaddress.com/ '''here'''].
      
[[File:WhatismyIP.png|border|center|class=tlt-border|1088 × 393px]]
 
[[File:WhatismyIP.png|border|center|class=tlt-border|1088 × 393px]]
   −
* Once you have connected your PC to a routers WiFi you can use command line (If using Windows OS or terminal on Linux and macOS) to see if you are getting IPv6.
+
* You can also check what IP address you are getting via command line interface.
    
[[File:IPV6 on PC.png|border|center|class=tlt-border|701 × 434px]]
 
[[File:IPV6 on PC.png|border|center|class=tlt-border|701 × 434px]]
    
[[File:Cmdoutput IPv6.png|border|center|class=tlt-border|634 × 244px]]
 
[[File:Cmdoutput IPv6.png|border|center|class=tlt-border|634 × 244px]]
 +
 +
==See also==
 +
More information about [[RUTOS_relay_/_Wi-Fi_extender_/_repeater_/_bridge_configuration|RelayD]]
 +
==External links==
 +
More about [http://tunnelbroker.net TunnelBroker.net]

Navigation menu