521
edits
Changes
no edit summary
AT+CGSN.
AT+CGSN.
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel BG96 AT Commands Manual V2.3.pdf#page=17 '''2.8 AT+GSN Request International Mobile Equipment Identity (IMEI) - page 16''']
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=17 '''2.8 AT+GSN Request International Mobile Equipment Identity (IMEI) - page 16''']
The command returns International Mobile Equipment Identity (IMEI) number of ME. It is identical with
The command returns International Mobile Equipment Identity (IMEI) number of ME. It is identical with
AT+GSN.
AT+GSN.
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel BG96 AT Commands Manual V2.3.pdf#page=18 '''2.9 AT+CGSN Request Product Serial Number Identification - page 17''']
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=18 '''2.9 AT+CGSN Request Product Serial Number Identification - page 17''']
The command resets AT command settings to their factory default values.
The command resets AT command settings to their factory default values.
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel BG96 AT Commands Manual V2.3.pdf#page=18 '''2.10. AT&F Set all Current Parameters to Manufacturer Defaults - page 17''']
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=18 '''2.10. AT&F Set all Current Parameters to Manufacturer Defaults - page 17''']
The command displays the current settings of several AT command parameters, including the single-letter
The command displays the current settings of several AT command parameters, including the single-letter
AT command parameters which are not readable otherwise.
AT command parameters which are not readable otherwise.
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel BG96 AT Commands Manual V2.3.pdf#page=19 '''2.11 AT&V Display Current Configuration - page 18''']
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=19 '''2.11 AT&V Display Current Configuration - page 18''']
The command stores the current AT command settings to a user defined profile in non-volatile memory.
The command stores the current AT command settings to a user defined profile in non-volatile memory.
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel BG96 AT Commands Manual V2.3.pdf#page=20 '''2.12 AT&W Store Current Parameters to User Defined Profile - page 19''']
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=20 '''2.12 AT&W Store Current Parameters to User Defined Profile - page 19''']
The command restores the current AT command settings to the user defined profile in non-volatile
The command restores the current AT command settings to the user defined profile in non-volatile
may be ignored.
may be ignored.
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel BG96 AT Commands Manual V2.3.pdf#page=20 '''2.13 ATZ Set all Current Parameters to User Defined Profile - page 19''']
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=20 '''2.13 ATZ Set all Current Parameters to User Defined Profile - page 19''']
The command controls whether the result code is transmitted to the TE. Other information text transmitted
The command controls whether the result code is transmitted to the TE. Other information text transmitted
as response is not affected.
as response is not affected.
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel BG96 AT Commands Manual V2.3.pdf#page=21 '''2.14 ATQ Set Result Code Presentation Mode - page 20''']
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=21 '''2.14 ATQ Set Result Code Presentation Mode - page 20''']
The command determines the contents of header and trailer transmitted with AT command result codes
The command determines the contents of header and trailer transmitted with AT command result codes
following table.
following table.
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel BG96 AT Commands Manual V2.3.pdf#page=21 '''2.15 ATV TA Response Format - page 20''']
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=21 '''2.15 ATV TA Response Format - page 20''']
The command controls whether or not the module echoes characters received from TE during AT
The command controls whether or not the module echoes characters received from TE during AT
command mode.
command mode.
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel BG96 AT Commands Manual V2.3.pdf#page=23 '''2.16 ATE Set Command Echo Mode - page 22''']
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=23 '''2.16 ATE Set Command Echo Mode - page 22''']
The command repeats previous AT command line, and “/” acts as the line terminating character.
The command repeats previous AT command line, and “/” acts as the line terminating character.
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel BG96 AT Commands Manual V2.3.pdf#page=23 '''2.17 A/ Repeat Previous Command Line - page 22''']
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=23 '''2.17 A/ Repeat Previous Command Line - page 22''']
The command determines the character recognized by the module to terminate an incoming command
The command determines the character recognized by the module to terminate an incoming command
line. It is also generated for result codes and information text, along with character value set via ATS4
line. It is also generated for result codes and information text, along with character value set via ATS4
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel BG96 AT Commands Manual V2.3.pdf#page=24 '''2.18 ATS3 Set Command Line Termination Character - page 23''']
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=24 '''2.18 ATS3 Set Command Line Termination Character - page 23''']
The command determines the character generated by the module for result code and information text,
The command determines the character generated by the module for result code and information text,
along with the command line termination character set via ATS3.
along with the command line termination character set via ATS3.
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel BG96 AT Commands Manual V2.3.pdf#page=25 '''2.19 ATS4 Set Response Formatting Character - page 24''']
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=25 '''2.19 ATS4 Set Response Formatting Character - page 24''']
The command determines the character value used by the module to delete the immediately preceding
The command determines the character value used by the module to delete the immediately preceding
character from the AT command line (i.e. equates to backspace key).
character from the AT command line (i.e. equates to backspace key).
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel BG96 AT Commands Manual V2.3.pdf#page=25 '''2.20 ATS5 Set Command Line Editing Character - page 24''']
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=25 '''2.20 ATS5 Set Command Line Editing Character - page 24''']
The command determines whether or not the module transmits particular result codes to the TE. It also
The command determines whether or not the module transmits particular result codes to the TE. It also
or not engaged tone (busy signal) detection is enabled.
or not engaged tone (busy signal) detection is enabled.
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel BG96 AT Commands Manual V2.3.pdf#page=26 '''2.21 ATX Set CONNECT Result Code Format and Monitor Call Progress - page 25''']
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=26 '''2.21 ATX Set CONNECT Result Code Format and Monitor Call Progress - page 25''']
The command controls the functionality level. It can also be used to reset the UE.
The command controls the functionality level. It can also be used to reset the UE.
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel BG96 AT Commands Manual V2.3.pdf#page=27 '''2.22 AT+CFUN Set Phone Functionality - page 26''']
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=27 '''2.22 AT+CFUN Set Phone Functionality - page 26''']
The command controls the format of error result codes: ERROR, error numbers or verbose messages as
The command controls the format of error result codes: ERROR, error numbers or verbose messages as
+CME ERROR: <err> and +CMS ERROR: <err>.
+CME ERROR: <err> and +CMS ERROR: <err>.
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel BG96 AT Commands Manual V2.3.pdf#page=28 '''2.23 AT+CMEE Error Message Format - page 27''']
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=28 '''2.23 AT+CMEE Error Message Format - page 27''']
The Write Command informs the module which character set is used by the TE. This enables the UE to
The Write Command informs the module which character set is used by the TE. This enables the UE to
convert character strings correctly between TE and UE character sets.
convert character strings correctly between TE and UE character sets.
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel BG96 AT Commands Manual V2.3.pdf#page=29 '''2.24 AT+CSCS Select TE Character Set - page 28''']
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=29 '''2.24 AT+CSCS Select TE Character Set - page 28''']
The command is used to configure the output port of URC.
The command is used to configure the output port of URC.
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel BG96 AT Commands Manual V2.3.pdf#page=30 '''2.25 AT+QURCCFG Configure URC Indication Option - page 29''']
[https://wiki.teltonika-networks.com/wikibase/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=30 '''2.25 AT+QURCCFG Configure URC Indication Option - page 29''']