31,703
edits
Changes
no edit summary
Once your IPsec tunnel is operational, you can configure remote access to LAN devices via the tunnel as referenced in ''[[IPsec_configuration_examples#Configuration_overview_and_prerequisites|configuration scheme 2]]''. This section provides a description on how to do just that.
Once your IPsec tunnel is operational, you can configure remote access to LAN devices via the tunnel as referenced in ''[[IPsec_configuration_examples#Configuration_overview_and_prerequisites|configuration scheme 2]]''. This section provides a description on how to do just that.
----
----
*
* In order for the remote LAN access to work, we'll need to add a couple of static routes - one in each router. Login to a router's WebUI and navigate to '''Network → Routing → Static Routes'''. Continuing our example, below is figure depicting the static route configuration for '''RUT1''':
[[File:How to configure static routes for ipsec rut1.png]]
----
* And for '''RUT2''':
[[File:How to configure static routes for ipsec rut2.png]]
==Testing the setup==
==Testing the setup==
