31,703
edits
Changes
IPsec configuration examples (view source)
Revision as of 08:49, 28 August 2018
, 08:49, 28 August 2018→Basic tunnel
* You will be redirected to the instance's configuration window. From here we will discuss how to configure both instances (''RUT1'' and ''RUT2''). Creating a second instance is analogous to how we created the first one - just login to the second router and repeat the first two steps. Although not mandatory, we recommend that you use a distinct name for the second instance (for this example we use ''RUT2'') for easier management purposes. <br> The specifics of both configurations are described in the figure below:
* You will be redirected to the instance's configuration window. From here we will discuss how to configure both instances (''RUT1'' and ''RUT2''). Creating a second instance is analogous to how we created the first one - just login to the second router and repeat the first two steps. Although not mandatory, we recommend that you use a distinct name for the second instance (for this example we use ''RUT2'') for easier management purposes. <br> The specifics of both configurations are described in the figure below:
[[File:Creating an ipsec instance part 3 v3.png]]
[[File:Creating an ipsec instance part 3 v3.png|1150px]]
* Below are explanations of the parameters highlighted in the figure above. Other parameters (not highlighted) are defaults. You can find descriptions for these parameters in the '''[[VPN#IPsec|VPN manual page, IPsec section]]'''
* Below are explanations of the parameters highlighted in the figure above. Other parameters (not highlighted) are defaults. You can find descriptions for these parameters in the '''[[VPN#IPsec|VPN manual page, IPsec section]]'''
* The last step in configuring the IPsec instances is '''Phase settings'''. For this example we left the default Phase settings. If you're planning to change Phase settings, make sure they match with the Phase settings (both Phase 1 and Phase 2) of the incoming connection:
* The last step in configuring the IPsec instances is '''Phase settings'''. For this example we left the default Phase settings. If you're planning to change Phase settings, make sure they match with the Phase settings (both Phase 1 and Phase 2) of the incoming connection:
[[File:Creating an ipsec instance part 4 v2.png]]
[[File:Creating an ipsec instance part 4 v2.png|1150px]]
When you're finished with the configuration, don't forget to click the "Save" button.
When you're finished with the configuration, don't forget to click the "Save" button.
