505
edits
Changes
Ignition detection solution (view source)
Revision as of 10:54, 17 November 2022
, 10:54, 17 November 2022→Introduction
* 2nd option - the device turns on with the ignition and stays on for some time, even if the ignition is turned off.
* 2nd option - the device turns on with the ignition and stays on for some time, even if the ignition is turned off.
This example will use the 4-pin connector, available on most of the Teltonika networking devices:
This example will use the '''4-pin connector''', available on most of the Teltonika networking devices:
[[File:Networking rutos manual input output power socket pinout configurableio 0.png|border|class=tlt-border]]
[[File:Networking rutos manual input output power socket pinout configurableio 0.png|border|class=tlt-border]]
To access the I/O pins and power the device at the same time you would likely need one of these adaptors from our Accessories list:
* [https://teltonika-networks.com/product/power-cable-4way/ POWER CABLE WITH 4-WAY SCREW TERMINAL]
* [https://teltonika-networks.com/product/power-cable-with-4-way-open-wire/ POWER CABLE WITH 4-WAY OPEN WIRE]
* [https://teltonika-networks.com/product/4-pin-power-adapter-with-io-access/ 4-PIN POWER ADAPTER WITH I/O ACCESS]
==Schematics==
==Schematics==