Changes

* 1st option - the device turns on with the ignition and turns off when the ignition goes off.

* 1st option - the device turns on with the ignition and turns off when the ignition goes off.

* 2nd option - the device turns on with the ignition and stays on for some time, even if the ignition is turned off.

* 2nd option - the device turns on with the ignition and '''stays on for some time''', even if the ignition is turned off.

This example will use the '''4-pin connector''', available on most of the Teltonika networking devices:

This example will use the '''4-pin connector''', available on most of the Teltonika networking devices:

----

----

* Navigate to Actions tab.

* Navigate to Actions tab.

* In the '''Add new instance''' section, input name (delayoff in this example) for action and in '''Type''' select '''Output''', press '''Add'''.

* In the '''Add new instance''' section, input name ('''delayoff''' in this example) for action and in '''Type''' select '''Output''', press '''Add'''.

[[File:Addnewinstance.png|border|class=tlt-border]]

[[File:Addnewinstance.png|border|class=tlt-border]]

* Press '''Enable''' to enable the instance.

* Press '''Enable''' to enable the instance.

* Trigger interval – 1 (you could input a higher value, for example, if you are connecting to '''ACC''' and it turns off for a second when starting the vehicle - it would allow the Output Pin state remain static in the starting moment).

* Trigger interval – 1 (you could input a higher value, for example, if you are connecting to '''ACC''' and input signal goes off for a second when starting the vehicle - it would allow the Output Pin state remain static in the starting moment).

* Trigger – Falling (reacts when Ignition state goes from On to Off).

* Trigger – Falling (reacts when Ignition state goes from On to Off).

* Add actions – select the action which you‘ve created previously ('''delayoff''' in this example).

* Add actions – select the action which you‘ve created previously ('''delayoff''' in this example).

[[File:Jugglerinstance.png|border|class=tlt-border]]

[[File:Jugglerinstance.png|border|class=tlt-border]]