75
edits
Changes
no edit summary
This article contains instructions on how to extend RUT956 router hotspot network using TAP100 access point.
This article contains instructions on how to extend RUT956 router hotspot network using TAP100 access point.
==Configuration overview and prerequisites==
==Configuration overview and prerequisites==
Before we begin, let's take a look at the configuration that we are attempting to achieve and the prerequisites that make it possible. For this setup we are going to use RUT956 which LAN IP is 192.168.5.1 and TAP100 which LAN IP is 192.168.5.2
Before we begin, let's take a look at the configuration that we are attempting to achieve and the prerequisites that make it possible. For this setup we are going to use Teltonika router RUT956 which LAN IP is 192.168.5.1 and access point TAP100 which LAN IP is 192.168.5.2
[[File:Topology test test.jpg|border|class=tlt-border]]
[[File:Topology test test.jpg|border|class=tlt-border]]
'''Prerequisites:'''
'''Prerequisites:'''
<ul>
<ul>
<li> RUT956 </li>
<li> Router </li>
<li> TAP100 </li>
<li> TAP100 </li>
<li> End device (PC, Laptop, Smartphone) </li>
<li> End device (PC, Laptop, Smartphone) </li>
Go to '''Network -> LAN''' and press edit button and in pop-up window perform following actions :
Go to '''Network -> LAN''' and press edit button and in pop-up window perform following actions :
<ol>
<ol>
<li> Enter IPv4 address. </li>
<li>Enter IPv4 address. </li>
<li>Disable DHCP server </li>
<li>Disable DHCP server </li>
</ol>
</ol>
====Creating hotspot local user====
====Creating hotspot local user====
----
----
To configure HotSpot instance on RUT956 router, you should firstly download HotSpot package from device package manager. It can be found by navigating on router WebUI to '''System -> Package Manager -> Packages'''.
To set up a hotspot instance on the RUT956 router, we firstly must download the hotspot package from the device's package manager. You can access the package manager by navigating to the router's WebUI interface to '''System -> Package Manager -> Packages'''.
After you have successfully installed the hotspot package, the next step is to access hotspot configuration settings. Navigate to '''Services -> Hotspot -> Local users''' as we will be configuring local user authentication for our Hotspot instance. While in this section, please follow these steps :
<ol>
<ol>
<li>Enter any username. </li>
<li>Enter username that you wish. </li>
<li>Enter any password. </li>
<li>Enter passowrd that you wish. </li>
<li>Press add button. </li>
<li>Press add button. </li>
</ol>
</ol>
It's crucial to remember and securely store these credentials, as they will be used by users to authenticate themselves on the hotspot network successfully.
[[File:Local Users 956 Hotspot.png|border|class=tlt-border]]
[[File:Local Users 956 Hotspot.png|border|class=tlt-border]]
----
----
====Hotspot interface configuration====
====Hotspot interface configuration====
----
----
Now that we've successfully created a hotspot local user, the next step is to configure the hotspot interface. To achieve this, let's navigate to the router's WebUI and access '''Services -> Hotspot -> General'''. Once there, please follow these steps:
Once, there we need to do the following :
<ol>
<ol>
<li> Choose LAN interface.</li>
<li> Choose LAN interface.</li>
[[File:New Instance Hotspot.png|border|class=tlt-border]]
[[File:New Instance Hotspot.png|border|class=tlt-border]]
Next, in the pop-up window, please click the "Enable" button. You can choose to either leave all other settings at their default values or make adjustments as per your preferences. For the purpose of this configuration, we'll maintain the default settings.
[[File:Hotpost interface enable.png|border|class=tlt-border]]
[[File:Hotpost interface enable.png|border|class=tlt-border]]
==Access point (TAP100) configuration==
==Access point (TAP100) configuration==
From router side, we have configured everything we need to. It's time to configure TAP100.
From the router's perspective, we've successfully configured all the necessary settings. Now, let's proceed to configure the TAP100.
To begin, we'll have to access TAP100's WebUI. Instructions on how to access the TAP100 WebUI can be found in another article on our Wiki [https://wiki.teltonika-networks.com/view/QSG_TAP100#Login_to_device here]
After successfully establishing a connection to the TAP100 WebUI, the next step is to navigate to '''Network -> IP settings'''. Within this section, update the IPv4 address field to match the LAN network of your router. For instance, if your router's LAN belongs to the network 192.168.5.0/24 with a LAN IP address of 192.168.5.1, then configure your TAP100 with an IP address of 192.168.5.2 and a netmask of 255.255.255.0. This ensures that both devices are on the same network.
[[File:TAP100 IP address.png|border|class=tlt-border]]
That concludes the necessary configuration steps for the TAP100. Now, let's establish the connection between your router and the TAP100. To do this, you can simply connect one end of an Ethernet cable to the router's LAN port and the other end to the TAP100's Ethernet IN port on the PoE injector. For more detailed installation instructions, please refer to the installation guide which can be found [https://wiki.teltonika-networks.com/view/QSG_TAP100#Installation_Guide here]