Difference between revisions of "Juliustest"
(Blanked the page) Tag: Blanking |
|||
| Line 1: | Line 1: | ||
| + | ==Introduction== | ||
| + | <p>An embedded-SIM (eSIM) or embedded universal integrated circuit card (eUICC) is a form of programmable SIM card that is embedded directly into a device. The surface mount format provides the same electrical interface as the full size, 2FF, and 3FF SIM cards, but is soldered to a circuit board as part of the manufacturing process. In machine to machine (M2M) applications where there is no requirement to change the SIM card, this avoids the requirement for a connector, improving reliability and security. An eSIM can be provisioned remotely; end-users can add or remove operators without the need to physically swap a SIM from the device. | ||
| + | </p> | ||
| + | <p>In order to use eSIM with Teltonika Networks devices, some basic requirements must be met.</p> | ||
| + | ==eSIM Dimensions== | ||
| + | <p>Must match standard MFF2 eSIM size:</p> | ||
| + | |||
| + | [[File:ESIMreq.jpg|border|class=tlt-border|800px]] | ||
| + | |||
| + | |||
| + | ==eSIM Pin-Out== | ||
| + | <p>There are two default eSIM pin-outs:</p> | ||
| + | [[File:Pin-outs.jpg|border|class=tlt-border|300px]] | ||
| + | <p>The only difference in pin-outs is the IO pin – 2 or 3. Both versions of pin-outs are suitable for devices with eSIM.</p> | ||
| + | |||
| + | ==Requirements for eSIM packing reel: == | ||
| + | <p>13“ in diameter.</p> | ||
Latest revision as of 17:44, 14 February 2024
Introduction
An embedded-SIM (eSIM) or embedded universal integrated circuit card (eUICC) is a form of programmable SIM card that is embedded directly into a device. The surface mount format provides the same electrical interface as the full size, 2FF, and 3FF SIM cards, but is soldered to a circuit board as part of the manufacturing process. In machine to machine (M2M) applications where there is no requirement to change the SIM card, this avoids the requirement for a connector, improving reliability and security. An eSIM can be provisioned remotely; end-users can add or remove operators without the need to physically swap a SIM from the device.
In order to use eSIM with Teltonika Networks devices, some basic requirements must be met.
eSIM Dimensions
Must match standard MFF2 eSIM size:
eSIM Pin-Out
There are two default eSIM pin-outs:
The only difference in pin-outs is the IO pin – 2 or 3. Both versions of pin-outs are suitable for devices with eSIM.
Requirements for eSIM packing reel:
13“ in diameter.
