Changes

Login to the router's WebUI and navigate to '''Services → VPN → IPsec'''. Enter a custom name for your IPsec instance and click the "Add" button. Then click the "Edit" button located next to the newly created instance after which you will redirected to that instance's configuration window. Adhere to the configurations presented in the figure below:

Login to the router's WebUI and navigate to '''Services → VPN → IPsec'''. Enter a custom name for your IPsec instance and click the "Add" button. Then click the "Edit" button located next to the newly created instance after which you will redirected to that instance's configuration window. Adhere to the configurations presented in the figure below:

[[File:L2tpoveripsecserver1f.png|left|L2tpoveripsecserver1|border|class=tlt-border]]

[[File:L2tpoveripsecserver1f.png|left|L2tpoveripsecserver1|border|class=tlt-border|1100px]]

[[File:L2tpoveripsecserver2f.png|left|L2tpoveripsecserver2|border|class=tlt-border]]

[[File:L2tpoveripsecserver2f.png|left|L2tpoveripsecserver2|border|class=tlt-border|1100px]]

[[File:Custom options configuration v1.png|center|L2tpoveripsecserverIKE|border|class=tlt-border]]

 

 

*'''Remote VPN endpoint''' - IP address or hostname of the remote IPsec instance. '''Leave empty''' for the server configuration

*'''Remote VPN endpoint''' - IP address or hostname of the remote IPsec instance. '''Leave empty''' for the server configuration

*'''Enable''' - if checked, enables the IPsec instance

*'''Enable''' - if checked, enables the IPsec instance

*'''Type''' - the type of the connection. '''Transport''' encrypts only the payload and Encapsulating Security Payload (ESP) trailer; so the IP header of the original packet is not encrypted. Transport mode is usually used when another tunneling protocol (such as [[VPN#GRE_Tunnel|GRE]], [[VPN#L2TP|L2TP]]) is used to first encapsulate the IP data packet, then IPsec is used to protect the GRE/L2TP tunnel packets. NAT traversal is not supported with the transport mode.

*'''Type''' - the type of the connection. '''Transport''' encrypts only the payload and Encapsulating Security Payload (ESP) trailer; so the IP header of the original packet is not encrypted. Transport mode is usually used when another tunneling protocol (such as [[VPN#GRE_Tunnel|GRE]], [[VPN#L2TP|L2TP]]) is used to first encapsulate the IP data packet, then IPsec is used to protect the GRE/L2TP tunnel packets. NAT traversal is not supported with the transport mode.

*'''Bind to''' - which interface is going to be bind to the IPsec configuration. The L2TP interface must be selected.

*'''Bind to''' - which interface is going to be bind to the IPsec configuration. The L2TP interface must be selected.

===PC Client===

===PC Client===

*Other types of VPNs suported by RUTxxx devices:

*Other types of VPNs suported by RUTxxx devices:

**[[L2TP configuration examples]]

**[[L2TP configuration examples RutOS|L2TP configuration examples]]

**[[IPsec configuration examples]]

**[[IPsec RUTOS configuration example|IPsec configuration examples]]

**[[GRE Tunnel configuration examples]]

**[[GRE Tunnel configuration examples RutOS|GRE Tunnel configuration examples]]

**[[OpenVPN configuration examples]]

**[[OpenVPN configuration examples RUT R 00.07|OpenVPN configuration examples]]

**[[PPTP configuration examples]]

**[[PPTP configuration examples RutOS|PPTP configuration examples]]

[[Category:VPN]]