Line 11: |
Line 11: |
| ==Prerequisites== | | ==Prerequisites== |
| | | |
− | * MikroTik device(with L2TP and EoIP support) with Public IP | + | * MikroTik device(with L2TP and EoIP support) with Public IP (in this example we use '''hAP lite TC''') |
− | * Teltonika router or Gateway with Public IP | + | * Teltonika router or Gateway with Public IP (in this example we use '''RUTX11''') |
| * Firmware with EoIP for Teltonika device | | * Firmware with EoIP for Teltonika device |
| * Computer for testing and configuring the setup | | * Computer for testing and configuring the setup |
| | | |
| ==Configuration of the Teltonika Device== | | ==Configuration of the Teltonika Device== |
| + | |
| + | From the Teltonika router we will configure L2TP Client, EoIP and firewall rules in order to achieve working set up. |
| + | |
| + | ===L2TP configuration=== |
| + | |
| + | We will start by configuring the L2TP client. Open your device's WebUI and navigate to '''Services → VPN → L2TP''', add a new '''L2TP client''', once the configuration window opens, configure the client accordingly: |
| + | |
| + | [[File:Networking rutxxx configuration examples l2tp rut configuration v1.png||border|class=tlt-border|1100px]] |
| + | |
| + | 1. '''Enable''' the configuration |
| + | 2. '''Server''' - input the MikroTik Public IP here |
| + | 3. '''Username''' - username configurated on MikroTik server |
| + | 4. '''Password''' - password configurated on MikroTik server |
| + | 5. '''Save''' the configuration |