158
edits
Changes
LAN Traffic Splitting Using Advanced Static Routing Rules (view source)
Revision as of 14:21, 11 November 2021
, 14:21, 11 November 2021no edit summary
==Prerequisites==
For this particular configuration you will need:
* A Router with 2xLTE modules (RUTX12 is being used in the example)
* 2 SIM cards
* 2 PCs in the same LAN network
==Preparation==
* Prepare RUTX12, power up the device, insert two sim cards, check that both are active and working. SIM1, SIM2, PWR and signal strength indicators should light up.
* Access the router through WEBUI, go to Network -> Interfaces, make sure that both MOB1S1A1 and MOB2S1A1 interfaces are running (Status = Running). You should also be able to see their Ip addresses.
* Make sure that you have ADVANCED mode enabled. This will allow you to choose from a larger variety of settings.
'''Network -> Interfaces''' should look similar to this:
[[File:Interfaces.png|center]]
