5,719
edits
Changes
LAN Traffic Splitting Using Advanced Static Routing Rules (view source)
Revision as of 17:34, 26 November 2021
, 17:34, 26 November 2021→Testing Configuration
==Topology==
==Topology==
[[File:Topology scheme.png|left]]<br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br>
[[File:LAN Traffic Splitting Using Advanced Static Routing Rules v1.png|900px]]
==Prerequisites==
==Prerequisites==
==Configuration==
==Configuration==
===MOB2S1A1 Interface Configuration===
'''1.''' Go to '''Network –> Interface -> edit MOB2S1A1 -> Advanced settings -> Set IP4table to 10'''. Click save and apply.
'''1.''' Go to '''Network –> Interface -> edit MOB2S1A1 -> Advanced settings -> Set IP4table to 10'''. Click save and apply.
[[File:MOB2S1A1 Configuration.png|center]]
[[File:MOB2S1A1 Configuration.png|center]]
===Adding new instance of a routing table===
'''2.''' Go to '''Network -> Routing -> Advanced Static Routes -> Add new instance of Routing table.''' Table ID can be chosen freely, however, it later on must match in the routing rules configuration. E.G TableID = 10 and set the Name of the Table, E.G Name of Table = Example.
'''2.''' Go to '''Network -> Routing -> Advanced Static Routes -> Add new instance of Routing table.''' Table ID can be chosen freely, however, it later on must match in the routing rules configuration. E.G TableID = 10 and set the Name of the Table, E.G Name of Table = Example.
[[File:Routing table creation.png|center]]
[[File:Routing table creation.png|center]]
===Editing Created Routing Table===
'''3.''' '''Click the edit button next to the created routing table:'''
'''3.''' '''Click the edit button next to the created routing table:'''
[[File:Editing created Routing table.png|center]]
[[File:Editing created Routing table.png|center]]
===Static Route Configuration===
'''4.''' '''Configure the Static route in the following manner and click save and apply:'''
'''4.''' '''Configure the Static route in the following manner and click save and apply:'''
[[File:Adding static IPV4 route.png|center]]
[[File:Adding static IPV4 route.png|center]]
===Adding new routing rule===
'''5.''' Go to '''Network -> Routing -> Advanced Static Routes -> Add new routing rule by clicking on add''':
'''5.''' Go to '''Network -> Routing -> Advanced Static Routes -> Add new routing rule by clicking on add''':
[[File:Adding ipv4 routing rule.png|center]]
[[File:Adding ipv4 routing rule.png|center]]
'''6.''' Configure the newly added routing rule in the following manner:
===Configuring New Routing Rule===
'''6.''' '''Configure the newly added routing rule in the following manner:'''
[[File:Routing_rule_configuration.png|center]]
[[File:Routing_rule_configuration.png|center]]
'''7.''' Reboot the router
'''7.''' '''Reboot the router'''
'''Note:''' Mob1s1a1 interface does not have to be configured in this case as it works as a default one. PC1 uses it to reach the internet. Therefore, configuration is needed only on Mob2s1a1.
'''Note:''' Mob1s1a1 interface does not have to be configured in this case as it works as a default one. PC1 uses it to reach the internet. Therefore, configuration is needed only on Mob2s1a1.
To test what Ip your device is using to reach out to the internet you could use: https://www.whatismyip.com/
To test what Ip your device is using to reach out to the internet you could use: https://www.whatismyip.com/
PC1 Ip address to reach the internet should be the IP address of your routers SIM1 mobile interface MOB1S1A1:
PC1 IP address to reach the internet should be the IP address of your routers SIM1 mobile interface MOB1S1A1.
PC2 IP address to reach the internet should be the IP address of your routers SIM2 mobile interface MOB2S1A1.
PC2 Ip address to reach the internet should be the IP address of your routers SIM2 mobile interface MOB2S1A1:
[[File:Whats my ip test result 2nd SIM.png|center]]
[[File:Whats_my_ip_test_result.png|600px|center]]
