Changes

==Introduction==

==Introduction==

This article contains instructions on how to lock your Teltonika device to a specific cell. All mobile carrier cells are assigned a unique ID, which is broadcasted to all connected devices. It is usually irrelevant information for the end user, as cell switching on mobile phones and routers has become very good. But sometimes in '''remote areas''', it is beneficial to lock the LTE router to a single cell, as automatic mode may choose a cell with fewer or slower bands, as it only really looks for the '''best signal'''. '''For now, only some devices with Quectel modems support this feature'''.

This article contains instructions on how to lock your Teltonika device to a specific cell. All mobile carrier cells are assigned a unique ID, which is broadcasted to all connected devices. It is usually irrelevant information for the end user, as cell switching on mobile phones and routers has become very good. But sometimes in '''remote areas''', it is beneficial to lock the LTE router to a single cell, as automatic mode may choose a cell with fewer or slower bands. For now, only some devices with Quectel modems support this feature.<br>

'''Note:''' ''When the device is locked onto a single cell, it can still perform carrier aggregation (Cat 6 and higher modems only) with any other band/cell. The cell that you lock to will act as a primary band. The only way to circumvent this would be to also lock the router to a particular band.''

==Compatible modems==

==Compatible modems==