Changes

In your device WebUI, go to '''Status → System''' page. Under the '''Modem''' section, you'll see the '''Model''' row.

In your device WebUI, go to '''Status → System''' page. Under the '''Modem''' section, you'll see the '''Model''' row.

[[File:Networking_Quectel_configuration_locking_cellids_on_devices_with_quectel_modems_modem_model_v3.PNG|border|class=tlt-border]]<br>

[[File:Networking_Quectel_configuration_locking_cellids_on_devices_with_quectel_modems_modem_model_v3.PNG|border|class=tlt-border]]<br>

If the model starts with '''EG, RG, EC''', and '''not SLM or RG (5G not supported yet)''', this feature should work. However to make sure it's supported, command '''''gsmctl -A 'AT+QNWLOCK=?'''''' should '''not''' return '''ERROR''', when ran via [[Command_Line_Interfaces_RutOS#SSH|SSH]] or [[Command_Line_Interfaces_RutOS#CLI_.28WebUI.29|CLI]]. The response should look something like this:<br>

If the model starts with '''EG, RG, EC''', and '''not SLM''', this feature should work. However to make sure it's supported, command '''''gsmctl -A 'AT+QNWLOCK=?'''''' should '''not''' return '''ERROR''', when ran via [[Command_Line_Interfaces_RutOS#SSH|SSH]] or [[Command_Line_Interfaces_RutOS#CLI_.28WebUI.29|CLI]]. The response should look something like this:<br>

[[File:Networking_Quectel_configuration_locking_cellids_on_devices_with_quectel_modems_checking_compatibility_v2.PNG|border|class=tlt-border]]

[[File:Networking_Quectel_configuration_locking_cellids_on_devices_with_quectel_modems_checking_compatibility_v2.PNG|border|class=tlt-border]]